My Tractor Forum banner

CC Striping

3668 Views 17 Replies 7 Participants Last post by  jsoluna
I've recently figured out that the 60" mower on my CC3225 is really good at striping and wanted to share the outcome. All it seems to take is a roller that (mostly) flattens the grass in the direction of travel and you have to mow back and forth. The down side is that it takes 3-4 widths of mowing at the edges or you have to stop, back up, restart the PTO and then mow. I've done it a couple times now and found it takes no longer than mowing in circles and it's a nice effect.

Picture 1: Yes those are deer! The oak tree dropped acorns this year!

Picture 2: The swale you see in the upper left was dug with my CC3225!

Picture 3: Bigger picture of stripes. I mow about 2 acres.

Picture 4: This is my 3225 after I gave the wheels a little accent last year!
See less See more
1 - 1 of 18 Posts
Looks really professional thurnderbirl! I've become addicted to doing stripes an any lawn I can. It really brings out the contours of the land.
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.