My Tractor Forum banner

Carb rebuild question 641 and fuel flow question

1711 Views 4 Replies 3 Participants Last post by  souNdguy
I got a complete rebuild kit for the 1960 641 TSX765, when I took the carb apart the float has a little spring and bracket which sits on top of the float, the kit doesnt come with or even show/mention that bracket and spring in the direction pics, so not sure if I should use it or not? Also how much fuel should I be getting out of that fuel line it takes about 20 seconds to fill the sediment bowl.
1 - 2 of 5 Posts
Thanks again guys for the help, Im gonna pull off the line and check that screen out and maybe clean the tank out. Rebuild went good, but it seems after 10-20 minutes pulling the mower I have to push the clutch and let the engine catch up from stalling.
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.