My Tractor Forum banner

Carb rebuild question 641 and fuel flow question

1712 Views 4 Replies 3 Participants Last post by  souNdguy
I got a complete rebuild kit for the 1960 641 TSX765, when I took the carb apart the float has a little spring and bracket which sits on top of the float, the kit doesnt come with or even show/mention that bracket and spring in the direction pics, so not sure if I should use it or not? Also how much fuel should I be getting out of that fuel line it takes about 20 seconds to fill the sediment bowl.
1 - 1 of 5 Posts
It should fill quickly, sounds like you might have a fuel constriction, most likely trash in the tank has plugged up the inlet to the fuel line. Blow back though the line and see if you can get improved flow.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top