My Tractor Forum banner

Bolens/TBuilt GTx 20 Hydro

576 Views 3 Replies 3 Participants Last post by  DuffHG
I seem to have popped something in the pump and I am not sure what I am seeing. Replaced the oil seal around the range shifter and the front of the hydro started leaking pretty good. There is a metal ring around the input shaft and I can see the ball bearings... attached photos.
Any help identifying the problem would be great!

See less See more
1 - 1 of 4 Posts
That seal is part of the bearing. It only keeps the grease in the bearing. There should be another seal behind the bearing for the hydro fluid. If you are leaking fluid that rear seal will need to be replaced also.
  • Like
Reactions: 1
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.