[snorky]

hello all ....can anyone help or point me I the right direction ....my bevel gearbox on my 73 landlord 3410 3speed is at the point where I need to change out the bearings (all round)...now they aint fully shot yet but there is a small amount of play and oil leakage ....my problem is "parts tree" don't ship to the UK ..and don't give the sizes for me to look else ware ...so...does anyone have the knowledge of the bearing sizes I need

in hope Neil

 

[SCUMMY]

Gday Cant help as i in aus and had the same problem i got bits for mine a 7013s from here Small Engine Parts Warehouse | SEPW.com
i find info about my bgb from here and other places and from the net?
as to rebuilding em not much info as in hints or tricks so i got what i think i need about $200usd worth and i hope to have a go soonish
good luck
cheers

 

[dirtsaver]

Gentlemen good day to you both. I do not have Simplicity info anymore but may I suggest the largest Simplicity/Allis Chalmers collectors website in the world. Go to www.simpletractors.com . They really do have the biggest archive of information along with the most knowledgeable people, people that have restored many old Simplicitys over the years. A really great bunch of people too! Tell them dirtsaver sent ya. I've been a member for years but don't have the Allis Chalmers GTs anymore so rarely visit the site.

Good luck!
Larry

 

[KootenayMF]

I've had good luck with this outfit - and they do ship worldwide.

Simplicity 990755 Parts List and Diagram : eReplacementParts.com

In some cases, pics of the parts show the part #s.

I was just over there visiting my brother in N. Wales, could have dropped them off to you. Though shipping to Canukistan is not cheap either.

Hope this helps?

Al.

 

[snorky]

thanks all for taking the time to reply, I have striped out all the bearings and measured them ...here is some info if it helps

needle bearing ..BH-1412 .....O/D 1" 3/16... X... I/D 7/8 ...WIDTH 3/4

needle bearing seal ...472065-R...O/D 1" 3/8..X..I/D 53/64 (7/8 SHAFT) ..X WIDTH 1/4

large bearing ...205N14..O/D 2"3/64...X..I/D 7/8...X WIDTH 9/32

large seal ....jc-125-206-14....O/D 2"3/64..X..I/D 1"13/64..X..WIDTH 7/16

ON THE 3410 THE NEEDLE BEARINGS, LARGE BEARINGS AND SMALL SEALS ARE X2

I GOT ALL MY REPLACMENT PARTS FOR £50 UK ....NOT BAD I THINK

 

[KootenayMF]

I GOT ALL MY REPLACMENT PARTS FOR £50 UK ....NOT BAD I THINK

Good work + good price!

Al :OHCAN

 

[SCUMMY]

cool stuff
i am taking the bits i got to the bearing shop soon to see whats available! as i forgot to get the keys hope they know what #9 is.

Snorky
keep in touch to see how u go i got my 7013 at my mates shed to start splitting it when i get back up that way its 100km away
cheers
cheers

 

[snorky]

drop me a line scummy if you need any info

Neil

 

[SCUMMY]

no probs Snorky
i went to bearing place i can get the needle bearings the ball bearings are a bitsa to them!
seals no go
i not touched the 7013s yet will 1 day other stuff needs sorting out before i play with the toy.
i take carby off to give it a clean it only runs on the choke but cant get the jet out to get the top off can get new in usa but they wont post os but got a family over in Texas somewhere she say ok to get it and on send it
ok ill get pics as i get into it and ill sort a email out 1 day i hopping to get back home before the new yr
ok cheers