[kcp877]

I am in the process of repairing a ripped bag, but I noticed another problem when mowing today. My bagger hopper or hood doesn't have the hopper screen, its fine until the second bag is about 1\4 to half full, then it starts spitting stuff out of the side and gets worse until I empty it because there is nothing keeping the stuff from blowing out of the side.

I can't seem to find an individual parts listing similar to what sears has for their products, does JD have one?

 

[davidg]

jdparts.deere.com goto start here, then put in L108 for the model. hit enter, then go to the sectional and 86-material collection system.

 

[kcp877]

I tried three times, can't find the breakdown, i'm missing something. Mind copy and pasting the link?

 

[davidg]

it won't directly paste.

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt is as close as i can get you. enter L108 in the Model box and hit enter or click find. then you will see the "tree" on the left go down to "Sectional Index" click the + and go down to section 86. under that is ALL the breakddowns for the collection system.

 

[joecdeere]

see if this helps -

 

[kcp877]

Thats what I need, the screen and frame, thanks, i can look it up now.

I might start a new link, but anyone know off hand if I can add rear deck wheels or If I'm going to have to have someone weld them on?

 

[CUMan]

Thats what I need, the screen and frame, thanks, i can look it up now.

I might start a new link, but anyone know off hand if I can add rear deck wheels or If I'm going to have to have someone weld them on?

Most Deere gage wheel brackets are welded on; however, several years ago I was able to obtain bolt-on gage wheel brackets from Deere and added them on the rear of the deck on my L110.

It was not easy. The angle of the brackets was not correct, and I had to do considerable bending to get the wheels straight.

According to my notes, the Deere part numbers for the two brackets were GX20361JDY (left) and GX20296JDY (right). I believe these brackets were used on the front of the deck on the L120 model.

 

[kcp877]

I just found a set of rear craftsman bolt on wheels in the garage, wonder if these would fit if I drill a hole and paint them yellow. If not I'll order up these brackets