My Tractor Forum banner

Affordable rugged tire recommendations

1209 Views 8 Replies 6 Participants Last post by  Boyd
Hi, I'm looking for tires to put on my craftsman riding mower and before I just go out and buy something I thought I'd ask for opinions. I live out on a small ranch with a bit over 5 acres and I'm fighting to reclaim my land from the dense South Texas vegetation. It's full of cactus and a large variety of thorn bushes/trees and sharp tree stumps. I'm not worried about tearing up turf and need something that can really dig in and get great traction without going flat every time I mow. I was looking at the carlisle super lugs but they only come in a 2 ply for my tire size. The tires that came on the mower from the factory are 18x9.5-8 and 15x6-6 in the front. Any recommendations?
1 - 1 of 9 Posts
You can get tires for small aircraft that have a 1500+lb rating and so many plies they dont even need air,sometimes an small airport will have some hanging around in their scrap pile...they weigh more than regular tires too,and you can load them with fluid..

The only 2 bummers, is trying to mount them,they are usually used on rims that unbolt in two halves and use thick inner tubes..
I've mounted some on regular drop center rims and it was a bear of a job,the rim bead started to bend before the tire bead stretched over it and went on..also they are usually only ribbed tread and nearly bald,so you'll need chains for good traction..but they'll be hard to puncture..
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top