My Tractor Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
321 Posts
Discussion Starter #1
I bought a toothed flywheel for a vac set up and I cant see how to get the recoil piece that is right in front of the flywheel off. I see no retaining ring or set screws either, its a 8hp older Briggs horizontal engine:banghead3
 

·
Registered
Joined
·
2,034 Posts
Some of the motors had the recoil drive held on by the flywheel nut, the small motors that used the recoil drive that freewheels one way and holds the other screwed on to the crankshaft.
 

·
Registered
Joined
·
321 Posts
Discussion Starter #3
Some of the motors had the recoil drive held on by the flywheel nut, the small motors that used the recoil drive that freewheels one way and holds the other screwed on to the crankshaft.
I will try to turn it off with a Cresent wrench then, thankyou
 

·
Registered
Joined
·
321 Posts
Discussion Starter #4
well I got the flywheel changed out and am now looking for the right starter, my flywheel has 113 teeth. Will those starters on ebay with 14 teeth work?
 
1 - 4 of 4 Posts
Top