My Tractor Forum banner

955 Owners

1723 Views 3 Replies 3 Participants Last post by  Seane1987
955 Owners please look at your motor mounts and compare them to the ones in this picture and let me know if I need new motor mounts. They look to me like they have hardened and compressed. Thanks

Attachments

See less See more
2
1 - 4 of 4 Posts
Come on Guys, I know someone has a 955!!!!
If you have metal on metal or excessive engine movement, at any time, replace them; if you don't have any of those symptoms, no worries. :fing32:
If you can stick a prybar under the mount and make the mount slide up and down on the sleeve, replace them, if not, I would run it. I've seen engine mounts from an array of manufacturers that have a gap like yours have, but no problems.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top