My Tractor Forum banner
1 - 1 of 20 Posts

· Premium Member
8,828 Posts
Usually when the flywheel lets loose, the magnets come loose at the same time. It is no big deal. Use a little JB weld to glue them back on. Don't overtorque the fastener that holds the flywheel on. I have seen several flywheels lose their magnets. I use a parts magnet from the auto parts store to determine polarity. Be sure the check the polarity in position but before gluing them in place. Check that the other magnets are glued securely. I had one flywheel where all the magnets were loose.
1 - 1 of 20 Posts