My Tractor Forum banner

50" mower deck for JD 420-430

6405 Views 11 Replies 7 Participants Last post by  dirtintheeye
So I am in need of a mowing deck for my old 420. It would have originally came with a 50" or 60" shaft drive deck. I bought it without a deck and am trying to decide if I want a 50 or a 60. I had a 430 with a 60 and honestly thought it was too big for my yard. I don't have an acerage or anything big I just like the older bigger garden tractors. I have never used a 50 or seen one for that matter, but I do know a guy that has one for sale, at a premium of course. I am wondering if anyone on here had used both and how they compare. Do they both mow good? Is one preferable? I know the 50 isn't much wider than the tractor wheels, is that an issue? Is there anything bad about a 50 other than its not as big as a 60. I am thinking maybe the 50 wont scalp my yard in places the 60 did, and will fit it tighter places. Were the 50" decks just no popular because most people wanted to mow bigger areas or is there something else I'm missing?? I even talked to a guy who has been buying and selling this stuff for 26 years and had only ever seen one 50" deck! Also, wondering if a 50" from a 318 or similar would be able to be retrofitted with the shaft drive assembly or not. Thanks.
1 - 1 of 12 Posts
With some work you could fit the gearbox on the 50 in deck BUT the spindles are larger on the 60 in deck so you would need 2 different blades and then the height of the blades would have to be addressed,it would be different,.
I think the smaller decks leave a better cut than the larger one but Its from past experience but others might be of a different opinion.
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top