My Tractor Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,917 Posts
Is your gas cap sealed? Take the screw out of the base of the carb, let some gas (or water) out. Put it back in and set it at either 1 1/2 or 2 turns from seated and go from there. Next you can trace the ignition. I would clean all the contacts to begin with... Good luck!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top