My Tractor Forum banner

316 PTO question

736 Views 1 Reply 2 Participants Last post by  PA318Guy
On My dash the switch for the mower PTO is marked with 2 symbols and at the other position there is 1 symbol. I can't figure out the bottom symbol with the switch in the down position. I looked up under the back to see if there is a spline for a PTO shaft and on the hydro and there is one. This machine is new to me so I'm trying to learn what is what on it and what implements i can buy for it. So the question is what the 1 symbol on the dash goes to in the down position.
1 - 2 of 2 Posts
Should be for the rear PTO kit, which was used on the Material Collection System (MCS) for your tractor.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.