My Tractor Forum banner

300 H2 to H3

1994 Views 5 Replies 4 Participants Last post by  jseim
How hard is it to put an H3 valve off a 400 onto a 300? I have it stripped down right now for painting and engine overhaul. Just curious if alot of fabricating had to be done or if it was pretty much bolt in.

1 - 1 of 6 Posts
Yeah you'll need to modify the way the valve body mounts to the tractor frame because the steering box won't allow it to mount normally.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.