My Tractor Forum banner
  • Are you passionate about Tractors? Would you like to write about topics that interest you and get paid for it? Read all about it here!
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
TL;DR - Looking for gears/rebuild for Peerless 600 series transaxle.

Hello all! I am working on what I believe is 1979 Murray 11 hp 36 inch deck lawn tractor model 0-3667. So far I have got the old Briggs and Stratton 11 hp engine running nice and strong, rebuilt the steering, replaced the front tires, and replaced the seat. My next task is getting the mower to drive and stop. I was able to track down some brake pads which should be here today or tomorrow so hopefully with those and a bit of tinkering I can get the tractor to stop. However, after replacing the idler pullies and a new drive belt I am still only able to get the the Peerless Series 600 3 speed to shift into 3rd gear. When I was doing a fluid flush I could hear some rattling inside the case, so I am guessing there are a few teeth that are missing on the gears. I have done a ton of searching and am having no luck finding information or replacement gears for the series 600. I am not against full replacement; but don't want to spend a ton.

Does anyone have a lead on replacement gears for a Peerless 600 series 3 speed? Or maybe even a full transaxle replacement? Or is there a different transaxle out there that I can swap in and have a better chance of finding parts for?

Thanks
 

·
Super Moderator
Joined
·
38,404 Posts
Welcome to MTF Blaze_Wyo! Here is a link to a rebuild kit for the Peerless 600, although your Murray isn't listed it was a pretty common transmission at the time:

Bolens Parts :: Peerless 600 seriesTransmission rebuild kit , common on Bolens G8 (813) , Sears Garden Tractors / 792003 (2) 792004 (2) 788003 (2) 788035 (1) 788009 (2) 788033 (2) 788043 (1) 792001 (1) 788042 (2) (bolenspartsandsupplies.com)

Lots of info here at MTF and great members to help and share with, enjoy the site! Here is some site navigation assistance in case you need it:

2505609
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
@PA318Guy Thank you so much. I have been searching google, parts websites, and the forum for weeks. Ordering that kit today. Now if only I can get the wheels off the axle. More PB Blaster and heat I guess.
 

·
Super Moderator
Joined
·
38,404 Posts
@PA318Guy Thank you so much. I have been searching google, parts websites, and the forum for weeks. Ordering that kit today. Now if only I can get the wheels off the axle. More PB Blaster and heat I guess.
Good luck getting it fixed, those are tough old transmissions!
 
1 - 4 of 4 Posts
Top