[hammerdwn20]

Mounted the right side caliper

placed another 3 spool valve where the steering gear used to be. The handles will come up somewhere by the park-neutral-drive lever
I think the brake master cylinders will get mounted above that valve.

Moved the shaft for the rear pto to the left side of the machine inside the frame rail.

Anyone have any idea what im doing because i sure dont?

 

[hammerdwn20]

Got some work done on the rear pto

machined some DOM tube for the bearings to press into then made 2 frame brackets.
The rear still has a lot of steel work left to do. nothing is welded yet. Dont really have a plan so its going pretty slow.

 

[hankll]

i was just looking through rubber mounts to come up with a plan to mount the engine. i also want to incorporate a plate the goes under the oil pan to protect it from the u joint if it ever lets go

I was thinking that was needed and then saw your mention of it....good idea!

 

[David Berglund]

Nice Project!

Any updates here?

 

[Craig2x2]

Did you modify your caliper bracket for the new (now hydraulic) calpers? I couldn't tell in the picture, but thought you might have welded a bracket to the cast iron rear end housing.