My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. John Deere Forum
    Hello everyone, long term lurker digging up answers and finally to a spot I need some help with my lawn tractor. Model # M0X475B020134 with a 62c mower deck and all wheel steer. I have always had issues with this unit 5+ years with mower not engaging when hot, or once reverse is engaged...
  2. John Deere Forum
    Won't start unless removing this wire harness. When it's removed and cranked it will fire up for a few seconds. With the harness on it won't start at all. Super confusing. See picture for harness.
  3. Craftsman/Sears Forum
    I was using the mower for a couple hours and turned it on and off a few times. When I was finished, I got off of it to open the gate. It turned off when I got out of the seat. Then I got back on and it would only crank and wouldn't start. I tried using starting spray to see if it would fire up...
  4. John Deere Forum
    A few months ago I started trying to replace the head gasket on my John Deere l110 kohler 17.5hp cv491s since shop was going to charge $1000 for it to be replaced. After replacing it ran fine but leaked oil from valve cover. I removed sealant I used and cut out a gasket out of material. After...
  5. Construction Equipment
    Hello currently have a John Deere 210 LE skip loader machine has 4000+ hours Mechanic just installed a new re-constructed fuel injector pump as well as brand new injectors. Machine turns on but suddenly turns off by itself, when using starter fluid it turns on but has a bit of a thumping sound...
  6. Massey-Harris/Massey Ferguson
    Timeline of events leading up to today -Bought the tractor 2 weeks ago knowing there was some type of miss (sounded like fuel issues) -Got the tractor home and sure enough she would run for about 5 mins then would spit and sputter and choke out. Once that happened you would have to wait around 5...
  7. Craftsman/Sears Forum
    Hey all, i have an electrical gremlin I'm hoping someone can help with. I have an old craftsman 2 Model #536.252570 that was starting 2 days ago but now only clicks. the only thing I did was change the deck belt so i shouldn't have mucked anything up? I've been trying to chase it down with...
1-7 of 7 Results
Top