My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 32 Results
  1. Tiller Talk
    Here's some PDF's I have for anyone that wants them- Side note, I'm always looking for any info on this sickle bar, I don't own one, but am lookin, Thanks!
  2. Tiller Talk
    I have these older 5hp Briggs front tine tillers does anyone know how I can identify them? Having trouble with finding exact parts thanks to anyone in advance it has me stumped I’ve searched online forever
  3. John Deere Forum
    Hello All, So i recently purchased a "backup" 400 (read that as another toy) which came with, among other things, a 35a tiller with very worn tines. These tines could easily be confused with a set of fine Japanese steak knives. I don't currently need the tiller but can see a need for it in...
  4. Small Engines and Repair
    Looking for replacement tine drive bevel gear, brass or manual or who even made the thing, I suspect early 80's machine
  5. Kubota
    Hi I’m very new to tractors and farming so bare with me. I literally just bought a land pride tiller today and on the inner shaft on the right side (grease nipple side) the grease is being pushed out a little hole. Is there suppose to be a plug or maybe a grease nipple on the inner shaft...
  6. Tiller Talk
    I have an old YARD-MAN front tiller with the Tilling Selector knob in a "Z" turned sideways on the upper frame sheet metal, between the handles. It has the neatest grab-foot I have ever seen! Looks like a little two sided plow, like a row layoff tool. Anyway, the three digit model is...
  7. Tiller Talk
    Hi, I have an old Troy-Bilt tiller that I need to repair. But I am having trouble finding info about it. It is a Garden Way TH-1019. An H is stamped just below. Is it Garden Way TH-1019-H? The only other info I can make out is TH-1002 below the engine. I know there’s supposed to be a serial...
  8. John Deere Forum
    I have a Deere G100 and a guy selling a Scotts 30" Mechanical tiller (M0SCTLX) that I want to put on it. Will this bolt up with the right hardware? Not sure what the difference is between the Scotts and Deere tillers. Is it just the color, black vs yellow? The M0SCTLX tillers are made for...
  9. John Deere Forum
    So, little or no maintenance. Was my grandfather's now dad trys to keep up but can't. Tiller hooked up and worked for hour. Now belt pops off. Replaced long one to tiller , found bearing in mule shaft seized, replaced. Found the bushing in front pulley system shot, parts ordered, good belt. I...
  10. Lawn and Garden Tractor Accessories
    looking for a tiller on a new JD x590 (or other x5xx series, still new though) - will the 42" hydraulic work or do i need to settle for 30" mechanical? i've read conflicting feedback here, especially with older model JDs.. and i'm not looking for any conversion kits. thanks all.
  11. MTD
    So I just bought this MTD front tine tiller. It’s a 5 horse Briggs with power reverse. The engine is a 130202-0523-01 and was manufactured in 1975. I’ve done a lot to it to get it running and now that it works I’m down to the belts. To find the routing diagrams I need to know the model. The...
  12. Lawn and Garden Tractor Accessories
    Hey guys, The sun is creeping from behind the clouds and spring is almost upon us. So, I am on the lookout for a tiller. I have found a few options, and each has it's advantages and drawbacks. My options are as follows: (numbers are in metric and RO currency just for reference and scale, don't...
  13. SCUT Implements and Accessories
    Hi Everyone, I recently bought a used John Deere 2210 and have been looking for a tiller to go with it. I found a used Landpride RTR0550 and was wondering if there is any compatibility issues I should be aware about before purchasing? Any help/suggestions/advice would be appreciated. Phil
  14. MTD
    I recently bought a 1970 or 71 MTD 960 that came with a tiller. After struggling with it for a while I figured out that it needs to be set so that the input shaft of the tiller and output shaft of the PTO are parallel when it's at tilling depth. That takes care of most of the shake these...
  15. Tiller Talk
    Hey folks, Anyone have a line on where to get a throttle cable for #856336 Troybilt Horse III M8T Kohler tiller? After doing a modest reno on the engine fuel system and trans/tines seals, I'd like to start this baby up but I see the cable is either rusted/kinked/otherwise stuck in the throttle...
  16. Lawn and Garden Tractor Accessories
    So I recently bought a x750 new. My plan is to put a 3ph 1L and pto on the machine. I bought it over a SCUT because I mow amongst several building the SCUT wont fit around. I also primarily mow. My question is I am looking to get a tiller, and a log splitter for the 3ph. I assume the...
  17. John Deere FAQ and Stickies Section
    I am trying get guidance on the belt installation. When replacing the belt #2 (rear) the belt twists and burns. in reading the manual there is supposed to be a "half twist" in front and back. I have tried to adjust the tension however it does not seem to help at all. Could someone please give me...
  18. Lawn and Garden Tractor Accessories
    Not an exciting piece of equipment, but it has me perplexed. It's never been used (the tines are still painted), but it's probably from the late 70's - early 80's. Grandfather had a John Deere 140 H3, but this would not have fit it. I don't recognize the mount, and the darn thing has no...
1-19 of 32 Results
Top