My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 26 Results
  1. Massey Ferguson
    Hello folks, I’m new to the tractor world and I’m looking to buy a used snowblower for my 2005 MF 1433v. I’m looking for a non hydraulic unit, not sure of the size limit for it but I’m thinking 66”. Any ideas as to what I can put on it? Thank you for your time and input.
  2. Kubota Forum
    Hello All, I am hoping I can get some feedback and guidance here as I just purchased a 2023 Kubota GR2120 with 54" deck and front snowblower. I still have to wait about two weeks until I receive everything but am wondering: How high off the ground in Inches does the front snowblower raise on...
  3. MTD
    I recently purchased a 3 year old Yard Machines 547cc, 42" lawn tractor. I'm looking to buy a snowblower unit for this winter, but the specific unit that is designed for the tractor appears to be unavailable everywhere on the web. Does anyone know if other snowblowers are compatible?
  4. Cub Cadet Forum
    Can anyone help me identify this snow blower and snow blade ? Neither have identification tags on. Can take additional measurements if needed any help is appreciated, thank you !
  5. Cub Cadet Forum
    I used this forum a lot when researching which tractor to buy. I finally settled on a Cub Cadet XT2 GX54D. It has performed well so far on 2 acres. I wanted to post my experience with the snowblower attachment because it has not been positive. I used it for two winters on a paved driveway...
  6. Lawn and Garden Tractor Accessories
    I have a 1974 MTD 16 hp Farm King with a snowblower. Last year I shredded the long belt and I am trying to find the size of the belt. So far I have been unsuccessful in looking it up. Any assistance would be appreciated. Thank you
  7. John Deere Forum
    Hey there, first post on here! I’m looking for some help, I’m looking at picking up a snow blower for my jd 260 I’ve found one in my area that looks like it’ll fit but it’s from a John Deere saber. Not sure what model as the guys not sure and he sold the tractor and is now selling the blower...
  8. The Shed
    I just bought a house near Albany, NY that has a 1200' gravel driveway. I'm looking to buy a tractor to snowblow and grade it (wont be used as mower). The driveway is mostly flat, but does have roughly 10-15' incline over a 50' length. I'm ok with it taking all day to grade the driveway as...
  9. Simplicity/Allis Chalmers Forum
    Hey guys! You have sold me on the simplicity conquest (2550) and thanks for all your help so far. I want a snowblower attachment for the driveway and originally I was going to get a Beromac, but it seems as though they don't sell one for simplicity. I called a simplicity dealer and they want a...
  10. Introductions
    New guy here, checking this place out, see what it's all about, got a beautiful Bolens 1050 with a new engine under the hood and lots of attachments and I think I'm getting ready to let somebody else be the proud owner. This is my first stop to start exposing this wonderful piece of equipment...
  11. John Deere Forum
    I've spent some time looking for a similar issue, but couldn't find anything listed, so please forgive me if this has been covered somewhere else! Setting up a new to me John Deere 425 with a snowblower for the first time. I have managed to get everything connected and set up but for one thing...
  12. Snow Removal Equipment
    Hi Everyone! I wandered over from the Walk Behind section because I need help with my Snapper snow blower. This is a single stage unit with the Flathead Briggs and Stratton 5HP engine. The issue I am having is that I can not find paddles. Therefore, has anyone seen a source where I could...
  13. Cub Cadet Forum
    I just picked up a 2007 model 353 snowblower for my GT 3200, and the owner had the gearbox apart to show me the wear on the brass gear. He hit some roots with a real bolt in the shear pin hole and and the brass gear shows some marks, although it’s really not that bad. I bought a new one, but...
  14. Lawn and Garden Tractor Accessories
    Hi folks! I'm a new guy in this world of lawn tractors so bear with me 🙂. I recently purchased a 44" snowblower attachment for my John Deere e170 lawn tractor. I started the assembly and I installed the front hitch to the front of the tractor. The starting position of the lever, when it's...
  15. John Deere Forum
    I’m having issues after a few days of researching finding parts needed to attach a second hand 44” snowblower to my X300. I have the blower and the front quick attach hitch. I need basically all of the lifting parts from the quick hitch back. Does anyone have a parts drawing for the lifting...
  16. Lawn and Garden Tractor Accessories
    Hello, I bought a 2020 John Deere e140 and I picked up an older snow blower off a d130 (same 100 series setup as mine). I am just wondering how this installs on my blower, and what exactly am I missing? Pics attached. Thanks
  17. Craftsman/Sears Forum
    Hey everyone, so i'm having a hard time finding out what attachments fit onto my 1993 Craftsman LT4000 Model Number: 917-255450. My friends uncle has a snowblower he offered to me its Model Number: 24577, Serial Date Code: 521825. I came across a post here saying that model fits any 89-94 Lawn...
  18. Other Brands of GT's
    What's a lawn king? Guy wants to get rid of of one with a snowblower, wondering what it is and if I should buy it. Never seen one before, can't find jack about it. Looks kinda like the older craftsman mowers, but I cant find that anywhere. So 3 questions, what is this? What's it worth? And can...
  19. John Deere Forum
    After the engine on my L120 lawn tractor died two summers ago, I shopped around and found a used D140 to replace it. I wanted to stick with the "100" series tractors so I could continue using my 42" snowblower attachment. The dealer who sold me the D140 assured me that the frames on the L120...
  20. Full Size Implements and Accessories
    Unit has less than 24 hours on it since new. I no longer have a use for it. Unit has hydraulic chute control. Very good shape. Shed kept. Asking 2500.00 text 2702934089 located in murray ky.
1-20 of 26 Results
Top