My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 35 Results
  1. Troy-Bilt Forum
    Greetings. I have a that runs great, except I noticed some extreme play in the tines when I finished a pretty tough job. Like most of you, I tore into the gearbox (MTD 753-06063) to find out WTH. Sure enough, the spiral gear was very loose at the input cable side and a boatload of metal...
  2. MTD
    so I recently got a lt950-h for free and the wiring harness was chews right in half but i can not fine a diagram anywhere. would anyone have a diagram for this mower?
  3. Tiller Talk
    I have an old YARD-MAN front tiller with the Tilling Selector knob in a "Z" turned sideways on the upper frame sheet metal, between the handles. It has the neatest grab-foot I have ever seen! Looks like a little two sided plow, like a row layoff tool. Anyway, the three digit model is...
  4. MTD
    Good day everyone. I got a 16 hp briggs that won't crank with the spark plug installed. I changed the battery(to a 230 CA that tests good), red wire from battery to solenoid and from solenoid to starter, new starter, new solenoid. When attempting to start I get maybe 1/4 to 1/2 rotations...
  5. Lawn and Garden Tractor Accessories
    I have a 1974 MTD 16 hp Farm King with a snowblower. Last year I shredded the long belt and I am trying to find the size of the belt. So far I have been unsuccessful in looking it up. Any assistance would be appreciated. Thank you
  6. Snow Removal Equipment
    Hello Everyone im David and im looking for some assistance with a snowblower MTD model # 190-491-000 would work on a craftsman Model # 917 258591 .I have a MTD Yard Man that just took a crap today and got the snowblower for it,im glad that it did take a crap before i put it on there seeing I...
  7. Backyard Round Table: L & G Tractor Related Topics
    Hello all! I am new to this website, but I need help identifying a tractor. I got this columbia lawn tractor out of the garbage and it came with a briggs and stratton 12 hp engine. Now I know this isn't the original motor as it says 16hp 42' on the side. I can't see to find the year of...
  8. Cub Cadet Forum
    So I am driving a state road in N.E. Ohio when I spotted this rare animal. It's an Ohio Chamaeleon. LOL. I do believe that in another year this camouflaged beast would have been lost forever. Overgrown with weeds and vines it had to be yanked away from deaths grip. After talking to land owners...
  9. MTD
    Good day everyone. New here hope someone can help me out with my lawn tractor. I went to look at a lawn tractor(used). When I got there it was running. The seller had to boost it as he didn't have a spare battery. At the time I didn't think about all the components he bypassed and bought the...
    mtd
  10. MTD
    Hey, I have an older mastercraft hydrostatic that I bought used, it has sat for a while and runs good, but whenever freshly started and whenever I go uphill it will two intensities of squealing and it will loose acceleration. The sound seems to be coming from the drive belt pulley or shaft, I...
  11. MTD
    Hello, i bought this Huskee Supreme GT a few months ago because the previous owner said it was having trouble climbing hills. I started with new belts and some odds and ends to get it ready for the cutting season. After the new belts (all 3 of them) it seemed to pull hills just fine. Now I'm...
  12. MTD
    This has been a beast of a tractor since bought new in 1998. Has about 750 hours on the meter currently. Includes the 50'' deck, 3 point hitch arms, draw bar, receiver hitch, snow plow, wheel weights, homemade 25 gallon tank sprayer, and spring tine rake. Sprayer and Tank use the same basic...
  13. MTD
    So I just bought this MTD front tine tiller. It’s a 5 horse Briggs with power reverse. The engine is a 130202-0523-01 and was manufactured in 1975. I’ve done a lot to it to get it running and now that it works I’m down to the belts. To find the routing diagrams I need to know the model. The...
  14. Introductions
    Howdy folks, We found this useful forum back when we lived in France and kept our "Frankenstein" MTD riders running over rough terrain. We left them when we sold out and moved home to Texas. I haven't been in this forum for a few years so here's a shout to any other Texans near Burnet. I see...
  15. MTD
    I recently bought a 1970 or 71 MTD 960 that came with a tiller. After struggling with it for a while I figured out that it needs to be set so that the input shaft of the tiller and output shaft of the PTO are parallel when it's at tilling depth. That takes care of most of the shake these...
  16. MTD
    Hey everyone! I have a MTD F-N-R transmission from a Troy-Bilt Bronco (Model 13aj609g766) with the vari-drive ‘go pedal’ setup (not shift on the go, but that doesn’t make a difference, trans is the same). It was out to the trash and I saved it a while ago. Made various posts here about valves...
  17. Other Brands of GT's
    What's a lawn king? Guy wants to get rid of of one with a snowblower, wondering what it is and if I should buy it. Never seen one before, can't find jack about it. Looks kinda like the older craftsman mowers, but I cant find that anywhere. So 3 questions, what is this? What's it worth? And can...
  18. Other Brands of GT's
    I have a Weed Eater S165H42 with a Tecumseh Enduro XL/C 16.5 engine. I replaced the carb and it starts right up and purrs like a kitten. I can engage the blades without a hiccup. After about three minutes of mowing, it just dies. I’ll check the fuel filter and it’s full. I ran it with a loose...
  19. MTD
    This is a rough Wizard 16hp tractor we picked up. I have started painting it red and building a loader out of scraps I have laying around. I installed 7.60 Ag tires on the rear and 5.00 x 10 on the front. Front rims are atv wheels and are too wide, so I have to find skinnier wheels. Engine...
1-19 of 35 Results
Top