My Tractor Forum banner
hydraulic
1-12 of 12 Results
  1. Massey Ferguson
    I'm new to the forum and appreciate any help from you fellows. We've got a 2000 MF 1250 with a 1466 front end loader. I changed a hyd hose on the left side of the lift cylinder and now I have air and can't seem to work it out by using the hyd. Any idea on how to bleed the air out? Thanks!
  2. Other Brands
    I have bought recently a Mistsubishi GS200 20hp tractor (it is actually (MAM) Misubishi Agriculture Machinery - part of Mitsubishi group) year of manufacture is 2009. Bought it on auction in Belgium - probably a private import from Japan. Now I never thougt that a Mitsubishi tractor will be a...
  3. Kubota
    Hi, I've been researching this for weeks, talked to two dealers and summit hydraulics. No one can give me an answer, summit hydraulics told me to go watch tractor time with Tim on YouTube lol. I have a Kubota L4701 with a backhoe. I would like to turn my mechanical thumb into hydraulic and I...
  4. Hydraulics
    I put new hoses on my 1979 Ford 445 front bucket shortly after it quit going up and down. It will curl both ways but not up and down. I switched the hoses on the cylinder and it went up and down for a little while but quit working after short while. I believe I have air in the system but...
  5. John Deere Forum
    Hey, so I am in the first year of ownership, and this is the first winter using the x595. I don’t have anything to do with it over the winter so I thought it’s a good idea to start it up once a week and let it run for 15-20 min to keep it from having a drained battery. There is a high pitch...
  6. Simplicity/Allis Chalmers Forum
    Good Afternoon, I have a 1970(?) Landlord 3210v, and am looking to do a few upgrades. The one most important to me is some form of Hydraulics. I would like to mount a pump under the belly of the tractor, similar to the position for the mid mount mower deck. Im not doing anything fancy with...
  7. Ford/Post 1990 New Holland
    I recently became the owner of a 1973 LGT145. The lift cylinder is leaking. It appears to be a welded cylinder. Does anyone know of a generic cylinder from Northern Tool or another source that can be used to replace it with? Any help is greatly appreciated. Thanks, NCHillbilly
  8. John Deere
    Just bought a used 2001 JD 4700. It now has a serious hydraulic fluid leak. I thought it was an easy replacement of the fitting and the coolant line but now I realized its coming from around the fitting. Anyone have any ideas?
  9. Introductions
    Howdy all! Love tinkering on old iron, finally got a 1972 model Case 222 a year or so ago, but didn't do much with it til this Spring. Now I got the bug! Ended up getting a 1983 model Case 444 and a parts rig a few weeks ago and love to work on em all! Primarily interested in older heavy garden...
  10. John Deere
    I’m making this post for someone a little less computer savvy than me that is a lot more mechanic savvy than me, so, please be nice! 😉 He says that a few days ago, his JD 6400 4wd, synchro plus, (1995 model) had some hydraulic problems. He said that the loader and 3 point hitch wouldn’t work...
  11. Hydraulics
    Hello, Do you know how can I solve the fluctuation of the hydraulic system (hiccups) on an old (2003) John deere 5700 tractor, the system is the same of all of the JD 5 series? The tractor was working well, then the hydraulics don't lift the heavy implements, so I sent the pump and the valves...
  12. Ford/New Holland Tractors
    I am new to tractors and tractor repair and found lots of information on 3 point not raising but not lowering. I may have 2 issues or just one. Here they are. 1) The control level is in down position but the 3 pt raises when the tractor is started. When the tractor is turn off the 3 pt will...
1-12 of 12 Results
Top