My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. John Deere Forum
    Hello everyone, I’m brand new to the Forum. Today, I changed the transaxle fluid in my grandmother’s 2021 X730. I added the 8qts (actually 8.1qts ) that the manual says to add but the level is WAY up on the dipstick. At least an inch above the dashed area of the dipstick. Did I mess up by adding...
  2. John Deere Forum
    I changed the oil to the Hyguard from the John Deere store, changed the filter. Added the 7 quarts stated in the manual. Drove it around back and forth , lifted the hydraulics up and down. Dipstick afterwards is reading very low even after letting it sit. After i orginally added the 7 quarts...
  3. John Deere Forum
    It appears that some moisture got into the hydraulics of my 45 loader for my X585. When I was putting it on for the first time this season today, the loader hydraulics were under pressure and would not connect (I know, seasonal temp changes). So, I had to manipulate the nipple on one of the...
  4. John Deere SCUT
    hey, I have a 1025R tractor and was going over some down tree cuttings, and not sure what I did to cause a leak under it. maybe drain plug?, after parking the tractor I noticed what looks like a good amount of oil leaking, maybe hydraulic or motor oil. maybe someone can tell me what part number...
  5. Hydraulics
    new to machinery.. I just got a 2000 New Holland 555e. I had to change a leaky fitting.. I noticed that the hydraulic fluid was milky. Is there anyway to get rid of the moisture w/out having to do a complete fluid change. thanks.
1-5 of 5 Results