My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Ford N's 9N/2N/8N
    Guys, hi, and thanks in advance for any advice. So, I am a real noob when it comes to tractors and the internal combustion engine, in general. I needed something to haul logs from the woods, so a neighbor sold me a 1945ish Ford 9n 6 volt It ran well enough when I was testing her out. Drove it...
  2. Simplicity/Allis Chalmers Forum
    Hello I have a Briggs 17hp vanguard that is cranking very slow, it had too much oil so I drained some, and I am going to crank it over, the question I want to ask is why is it cranking so slowly, could it be a bad solenoid, or bad wiring?
  3. John Deere Forum
    I have a John Deere GT235 with the B & S engine. About 500 hours. When starting from cold...I have to crank and hold choke. I get just a second or so of running. Repeat about 3 or 4 times and then I finally get it fired up. I put in a new fuel filter with no improvement. I'm wondering if...
1-3 of 3 Results
Top