My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 42 Results
  1. John Deere Forum
    I recently purchased a later model Deere 345 Garden tractor. It has the FD611V engine. It was lower houred (540) and was in good cosmetic condition. When I purchased it smoked a bit, but owner said it was because it was sitting for a few days. I did fresh maintenance -oil, filters, etc...
  2. Lawn and Garden Tractor Accessories
    Good day, list! I'm lusting after a GT/loader, but hoping the same machine can also be my mower. Am I dreaming, or do some GTs do this well. (I understand that for heavy loader use or for snow removal, I'll want to dismount the deck, but day-to-day in the summer, I'd love to have both...
  3. John Deere Forum
    Hi! I have a John Deere 210 that will not run. It turns over great with very good compression. I hooked up a test light and when cranking it gets no spark. When passing over the run position it gets a little voltage (test light turns on very quickly then stays off). I have replaced the points...
  4. Lawn and Garden Tractors By Brand
    Dear MTF community, I’m curious :unsure: to learn what’s out there in new production for inexpensive, small tractors with mower deck and a loader that can lift higher than the tractor’s hood. No other requirements to start. I want to learn if it’s possible to get into such a rig for much less...
  5. Lawn and Garden Tractor Accessories
    wondering if anyone has ever tried to attach a MTD oem-190-833 46" snow plow, to a 160 John Deere garden tractor.
  6. Hydraulics
    I built a PF Engineering loader for my John Deere 317. When looking at the front of the engine I have the pump mounted in a direct drive orientation. Engine seems to spin counter clockwise, so when looking at the back of the pump I have the suction/ inlet line on the right side and the pressure/...
  7. John Deere Forum
    We removed the plastic cap, E-ring and washer. The wheel slides forward but gets caught on the end of the axle, past the E-ring groove. The end of the axle seems to be flared to a larger diameter than the rest of the axle. Both front wheels have the problem. We do not see this situation on...
  8. Case_Ingersoll_Colt Forum
    I broke my steering wheel for my 446 and I am looking for a replacement. Online I have seen them in a 5/8 size but I believe mine is bigger then that. Most also have a pin while mine looks to just be friction or something else, no pins for it. Any suggestions on what to do?
  9. Case_Ingersoll_Colt Forum
    I recently acquired my first garden tractor, a first generation Case 446 with the onan 43 engine, I have got it running but it unfortunately only one cylinder seems to be running correctly, the other one has really low compression and seems to make some weird clacking noises when starting. I...
  10. Craftsman/Sears Forum
    Hello, I tore apart my sears suburban 10 transaxle and found teeth broken off the pinion gears, I'm trying to find new gears but mine have 13 teeth on the pinion and 22 teeth on my axleshafts. The only parts I find are the sears 8657h pinions with 10 teeth. I am confused and am hoping someone...
  11. Backyard Round Table: L & G Tractor Related Topics
    I recently decided to purchase a quality garden tractor and sell my cub cadet ZT mower. My neighbor is in his 70’s and comes to visit me on a cub cadet tractor he bought ~50yrs ago. I have trouble imagining any ZT that ages with me like that. I am currently leaning towards. JD 570 54”, but would...
  12. Backyard Round Table: L & G Tractor Related Topics
    I recently picked up this old garden tractor from an auction and I have no information about it. All I know is that under the blue paint is yellowish orange paint, and I think it has an Allis Chalmers engine. I will gladly send more pictures to anyone who asks.
  13. Husqvarna 2021 TS354XD

    Fresh off the delivery truck. Zero hours!!
  14. Gravely
    About to pull the trigger on this beautiful garden tractor. Just looking for something to maintain small food plots and a garden or 2. This only interested me because of all the attachments and extras. 1 family owned since new. 400 hours. Low use. Attached pic of listing info. Just wondering if...
  15. Lawn and Garden Tractor Accessories
    I am working on building up a collection of sleeve hitch implements for my garden tractor. I was looking into Heavy Hitch accessories, and it got me thinking. If one took this (SHR): Thereby converting their sleeve hitch to a 2" receiver, and added one of these (H2TB): They would have a...
  16. Introductions
    Hi Everybody. I have been a member of this forum for 11 years, but never posted anything before.(!) But, today that is gonna change. I have made a YouTube channel called "Wild Mechanic". And I want to share a film I have made about my John Deere 110. I think many here will appreciate it. I...
  17. Lawn and Garden Tractors By Brand
    I bough a massey ferguson 1450 made by snapper. its got the good sundstrand rear end. i was wondering if there was a possibility to make it 4×4? a bigger engine is on the way aswell as loader plans. instead of buying a 25000$ tractor i wanted to make my own! is it possible to put a rear end from...
1-17 of 42 Results
Top