My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Craftsman/Sears Forum
    i have a 1968 sears suburban 12. when i got it it had a 18 hp briggs single that was jankified into the frame. i got it because it was cheap and came with a three point, a set of massy split weights, a plow and a disc. the tractor is in decent ish shape and i would like to use it. i have a very...
  2. Snapper Forum
    Hello all, I am a new member here and will be attempting an engine swap on a snapper riding mower model Sr825 series 16 25'' its orig. 8 hp. engine model 195707-016101 blew the head gasket and I snapped 4 of the head bolts in the cylinder while removing the head. tried ti drill then and retap...
  3. John Deere Forum
    I have a John Deere G100 with a Tecumseh Enduro 17 I swapped on it. I have put a much stiffer spring on the governor, now the lowest it will idle is at what was previously full throttle, and the motor will rev as high as it can manage to with everything else mostly stock other than fuel system...
  4. Lawn and Garden Tractors By Brand
    Hi New to the site, so I have a Poulan Pro garden tractor that has no engine, and I have a good running Kohler Command 12.5. Model: CV12.5S Spec. NO: 1259 Serial Number: 2329905094. So what my issue is that the mower it came off of had a electric PTO and the Poulan Pro does not, just wonder if...
  5. John Deere Forum
    From the moment I bought my LX280 new, the engine has been surging. I knew nothing about tractors when I purchased it in 2005. Now, 15 years later I believe I need a new engine. When starting it blows white smoke, sometimes it blows actual oil out the exhaust. It loses at least a quart of...
  6. Cub Cadet Forum
    I may be able to picknup a LTX1045 that needs a motor. I have a 2166 with a good motor. Anyone know if I can swap the motor from the 2166 to the LTX1045?
1-6 of 6 Results
Top