My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 23 Results
  1. John Deere
    I have a John Deere 1070 that has periodically had starting issues. Had it towed to the local dealer awhile back, they said ground and battery clamps were bad, replaced them and set up a new ground in front of the battery to make it easier to clean and dielectric. Headlights haven't worked since...
  2. John Deere Forum
    I have been working on this 332 and had it all back together and running fine. Then the pto mid or rear would not kick in. Did the standard bypass of seat switch, have diagnosed replaced regulator, checked switches and wiring. pto worked again. thought it was maybe something hot like the...
  3. John Deere
    Hi there, trying to diagnose a problem on a JD 4310 that's electrical related. The machine sometimes won't receive any power, if you half turn the key nothing, no dash lights, or electrical at all, and full turn does nothing at all too. It doesn't always happen. Sometimes it has power just...
  4. John Deere Forum
    I bought an LT133 that was sitting for a while, but working before. So I did a complete fuel, fuel filter, air filter, oil, spark plug, battery, etc, the basic stuff, and still no crank. I started messing around with a multimeter, and testing all components. It has 3 safety switches (1 bypassed...
  5. John Deere Forum
    My next door neighbor (of 40+ years) has gone into a memory care facility and I told his Wife I would be happy to take care of mowing their lawn so she had one less thing to worry about. I use the X595 (2002 with 350 hours) because it has a larger deck than the X300 and his front yard is almost...
  6. John Deere Forum
    Hey Guys, Im pretty new to working on my own machines so I am still learning all the tricks and how to troubleshoot so bear with me while I go through what I have done so far to diagnose the problem: -Lawn Tractor was dragging when I tried to starter it, wouldn’t turn over. Unplugged the spark...
  7. Front Mount ZTR
    All looking for some help, the seat switch is blowing the PTO fuse. Steps I have done. 1. Replaced Starter Solenoid 2. Replaced Seat Shut off switch. 3. Unplug the seat switch, I get no blown fuse and get power, no start. 4. Plug in seat switch, same as 3. 5. Sit on Seat, fuse blows. 6...
  8. John Deere Forum
    Good evening! I’ve been visiting your forum for quite some time and it is excellent! I am having an issue with my X540 (model year 2007). The lower bearing on the PTO clutch is bad/noisy. Tonight I removed the assembly to see if I could service this bearing, although I ultimately decided to...
  9. John Deere Forum
    I have a 2007 X540 (sn 61092) and Kawa FD731V. This fall, I started my mower, drove about an acre (no PTO), and shut it off. Went back about an hour later to start it and I got nothing. Lights all came on, but not even a click was heard. This happened one time before, and my husband (who's 2x...
  10. Kioti
    I have a brand new CK 2610 hst. I want this tractor to out last me. Today I stopped at my local automotive parts store and bought a tube of dielectric grease. I started to add it to all my electrical connections. I have less than 7 hours on my new machine. I live in the north east and will be...
  11. BIG John Deeres
    At start up, no lights, gas gauges or fuel readings. Once started, the tractor often just stops and won't restart until a 5 minute wait. When the 4-wheel drive is engaged then lights and gauges work. We think it's a simple fix with a part, but the local tractor dealer will charge $225 just to...
  12. Kubota SCUT
    Having trouble with the lights on my 2002 BX23 and trying to be sure before I drop $75 on the flasher relay. Neither the turn signals nor the 4 ways are working, and there is no sound coming from the relay when either switch is made. I have verified the fuses and I have 12V at the switches...
  13. Kubota SCUT
    Having trouble with the lights on my 2002 BX23 and trying to be sure before I drop $75 on the flasher relay. Neither the turn signals nor the 4 ways are working, and there is no sound coming from the relay when either switch is made. I have verified the fuses and I have 12V at the switches...
  14. John Deere Forum
    I have a JD 316 with a 20 hp Linamar (Oman) it shut down on me and none of the lights worked when the switch was turned on. I ended up replacing the ignition switch. It then started working however, it would blow the 20 Amp inline fuse. I traced it back to the ground was live from the neutral...
  15. Craftsman/Sears Forum
    Hey all, i have an electrical gremlin I'm hoping someone can help with. I have an old craftsman 2 Model #536.252570 that was starting 2 days ago but now only clicks. the only thing I did was change the deck belt so i shouldn't have mucked anything up? I've been trying to chase it down with...
  16. Introductions
    Hi Everyone, I am new to this forum so I am going to introduce myself and post a question. My name is Matt and I work for a timber framing company, Maine Post & Beam out of North Yarmouth, Maine. Timber framing requires a lot of specialty tools and machinery which is why I wanted to join this...
  17. Power King & Economy Tractors
    I have a 1968 Power King, 12HP engine. The tractor has sat for about 2 and a half years under cover. I had the tractor running great before circumstances forced me to park it. Anyway. I installed a brand new battery on it today (4-21-21), a Duralast 26-DL, which is what was on it previously...
  18. John Deere Forum
    The engine is a GX630 from Repower Specialists. They have been pretty helpful but I think I've been wearing them and my local dealership out with question. In removing the Ownan I didn't see any negative pigtail grounding the dash harness. Prior to to making that ground I had weird voltages...
  19. John Deere Forum
    I bought my first John Deere this year, a 2020 X380. I plan to plow snow with this and will likely be working in dim or dark conditions during the winter so I am going to install a couple of small LED lamps and strobes (I live on a highway and want to be seen when clearing near the road)...
  20. Kubota
    This is on a Kubota L3050 (with front loader). I ordered an OEM alternator plug, it wasn’t the part I needed. I need the plug that attached to the black green and red wires coming from next to the fuel filter. Can anyone point me in the right direction?
1-20 of 23 Results
Top