My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 84 Results
  1. Craftsman/Sears Forum
    Can anyone tell me what the model name, i.e. lt2000? I can't seem to find parts for this anywhere. It's definitely an lt with a kohler motor, but someone beat this and ran it dry. (Who needs oil, right?). Got it running again, but there are other things I'd like to replace. Any info is helpful.
  2. Craftsman/Sears Forum
    Hello! I have a Craftsman 917.275970. I used it for about a year for grass and then with a snowblower attachment, and late in the winter I began having trouble with shifting gears. Initially the drive belt would stop completely when I pressed the clutch/brake pedal combo, and I could shift...
  3. Small Engines and Repair
    Hi all I'm brand new up the forum hope this is in the right place. I bought a brand new 3100psi craftsman gas pressure washer this spring. Used it twice in spring and sat till yesterday. After running about 20 minutes started making a revving up/then running normal pattern a couple minutes then...
  4. Husqvarna/Dixon
    Hello, I just purchased a 2002 Husky gth2254xpa and would like to put a snow thrower on it. The sticker inside the hood does not list it as an option. I'm thinking a blower that was made after this mower was made might fit. Has anyone found an older or newer blower that attaches to this GT...
  5. Craftsman/Sears Forum
    Hello, I'm been fixing my Dads old 18hp opposed twin craftsman garden tractor Model number 917.254450. It has a 6 speed peerless 820 transaxle. I was hoping to mostly use it to haul stuff around like brush, chicken manure, and wood in a dump cart, maybe some mowing too. Our lot is on the base of...
  6. Craftsman/Sears Forum
    Hello all. I'm looking for a color match for the pictured paint color. Craftsman/ husqvarna used this color on their limited edition dls3500 and 4500 models. Called sears parts direct today with no luck. I was wondering if anyone knew of a rattle can paint that matched with this paint?
  7. Craftsman/Sears Forum
    Hi All, I want to improve/tighten up the steering on my Craftsman GT3000, it is the 917 model by AYP. I would like to see if anyone has improved theirs or even converted it to electric steering? Any input or recommendations is appreciated!
  8. Craftsman/Sears Forum
    Hi! Had a surging 18HP Briggs on my old GT18 mower. I pulled the carb apart and cleaned it without fixing the problem. Foolishly(I think), on my second attempt to clean the carb, I pulled the 4screw fuel pump apart - got new innards for it. Now it just pumps gas out the hole in the front of the...
  9. Craftsman/Sears Forum
    Hello everybody. I am at a loss, I have a Craftsman Riding mower model 917.257720 with an electric PTO. My blades stopped working and I just can't figure out why. Here is everything I did and checked. I started out by checking the PTO pull switch and I had continuity on every position like you...
  10. Craftsman/Sears Forum
    Hello! I have a Craftsman II 18HP 917.254450 opposed twin. It was sitting for about 10 years under a car port. This is my first time fixing one so be easy on me. Hehe! I'm trying to get it back up and running. I've rebuilt the fuel pump and most of the carburetor, except for the float and seat...
  11. Craftsman/Sears Forum
    Hi there everyone! First post here, I apologize if it’s in the wrong place. I bought a Craftsman LT 1000 Model 917.286010 with a 15.5 HP B&S engine and I’ve been having a few issues that I was hoping y’all can help me with. It ran great before I parked it the winter of 2021, but silly me I...
  12. Craftsman/Sears Forum
    Got the mower cleaned up l, sharpened the blades rebuilt the carb because it sat for 2 yrs changed the oil, put new spark plug in, new air filter. It fired right up mowed the acre lot I have two weekends in a row went to move it out of the garage yesterday started then ran rough started to die...
  13. For Sale & Wanted to Buy (Your Location)
    Hi All, I'm trying to find a needle in a haystack here. I'm looking for a 1965 hood emblem/medallion that goes in the middle of the hood that says "Craftsman" on it for my newest tractor because mine is missing. This one in the picture that is circled in blue in my first picture. I am located...
  14. Craftsman/Sears Forum
    I can't find used mufflers for my GT18 it has a briggs opposed twin it has two separate mufflers one for each side and blows the exhaust out the sides and since it's missing one I need to find one and I saw that there is a couple of old treads on this but there were no replies so I figured that...
  15. Lawn and Garden Tractor Accessories
    I recently purchased a Craftsman LTX1000 that has a Craftsman/AYP/Husqvarna/MTD 42" snowblower attachment. AYP is apparently the actual manufacturer of this snowblower and it was marketed as all the other brands. It's still produced today or at least one produced so similarly it appears to be...
  16. Craftsman/Sears Forum
    Hello all, do the new Craftsman T3200 lawn tractors have a good transmission? Do they have a locking rear differential? Do they perform well on yard with steep inclines? I’ve read some reviews that sound like they have a locking rear differential but I can’t find it in any specs on Craftsman’s...
  17. Tiller Talk
    Hi everyone, I have a new to me, old Craftsman RT-8 Rototiller. I am looking for a belt guard. Anyone have one?
  18. Craftsman/Sears Forum
    Does anyone know where I can get this exact throttle handle in black that is circled in blue in the picture?? The one on my project Craftsman 855C tractor is broke pretty bad. The example below is from my stepdads leaf blower. Any help and sources would be much appreciated, thank y'all!
  19. Craftsman/Sears Forum
    I may get a hold of a Craftsman Snowblower attachment. Model : C151 61822 3 I have no idea if it will fit my Tractor. Craftsman LT1000 16.5 HP Model : 944.607451 Serial :061808D002016 From the look I have on the photo .. Look like it .. but for the life of me, I can't find a definitive answer...
  20. For Sale & Wanted to Buy (Your Location)
    Hey Garden Tractor Folks. I've been restoring these things for years and My health has finally got me down. I've got several complete tractors just itching to be restored. all have something wrong with them, just the usual stuff. I've got 3 GT18s with ONAN engines, Carb work on 2, powder coat...
1-20 of 84 Results
Top