My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Simplicity/Allis Chalmers Forum
    Simplicity Prestige (around 2003 model year) with 23hp Kohler, 54" deck. On the blade nearest the discharge opening, the blade adapter and spline washer that holds the blade on the arbor shaft separated while mowing. No warning, but the sound of the mower suddenly changed. I disengaged deck and...
  2. For Sale & Wanted to Buy (Your Location)
    1998 JD 265. I would like a blade and all attaching hardware. Preferably, with overload and manual angle. I would like to use for light grading. No PN's known. Fender mounted lift arm FYI. Any condition considered. Thanks. [email protected]
    $350 USD
  3. Lawn and Garden Tractor Accessories
    I am desperately seeking a blade and all attaching hardware for my 1998 265. I have walk behind snow blowers but want to use the blade for light grading (thawed ground). I see so many comments about blowers here, that there MUST be some forgotten blades lying about somewhere... :confused: The...
  4. John Deere Forum
    I have a JD d140 with a 48inch deck. I just swapped out the blades to some high lift ones. Upon testing, only the center blade appears to be working. Ive double checked the belt path, and with my wifes help, checked to make sure both edge blade pullys the belt is on, are spinning. what...
  5. Walk Behind Mowers
    I just purchased a used 2013 Snapper self-propelled mower and would like to know how well a Gator blade works on these mowers. Mine does not say Hi-Vac anywhere, so I assume it is not. Currently it has the original general purpose blade installed.
  6. Chippers, Trimmers, Leaf Blowers and Vacuums
    Is there a blade adapter for this model of Troy Bilt trimmer? I occasionally have to deal with some tough grass patches in my yard. Thank you!
  7. Lawn and Garden Tractor Accessories
    I’m thinking of purchasing a 54in John Deere snow plow with quick hitch. The dealer is quoting me with the hydraulic angling kit. My question is do I need the kit to angle the blade, or can I manually angle the blade? It’ll save me a few hundred bucks if so.
1-8 of 8 Results
Top