My Tractor Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. John Deere Forum
    I see these from time to time on eBay. The parts view within the PC2351 breakdown shows a PTO module and a wiring harness in addition to all the mechanicals. Is the module necessary for rear PTO engagement/operation - and if so, does anyone know where to get one?
  2. John Deere Forum
    Hey Guys, Hoping for some quick insight into how big of a job I have ahead of me. I purchased a 445 a few months back that had a minor leak where the axle arm mates to the transaxle center case. A few drips up to a salad plate sized puddle in a weeks time would show up under the machine. Last...
  3. John Deere Forum
    Got what appears to be a leaky right side cover plate and/or axle case on my 445's 2WS transaxle. Reading through the parts diagrams here: Section 50 - Drive Train Parts, I do not see mention of or listings for gaskets for the transaxle case and side/rear covers or the axle cases. Are they...
  4. John Deere Forum
    Hi guys, I have a new to me 425 with a 54" deck and I can't get the deck to lift higher than a 4.5" cut. Is that normal? It also needs four new tires and I'm wondering if I can add extra height by getting the larger 26" tires available for the 445 rather than the 23" that are currently...
  5. John Deere Forum
    I just recently had my piston rings replaced and it ran amazing for a couple hours after that. Until I started it one day to plow my driveway and it overheated, I replaced the coolant and now after 5 minutes of running at half throttle it overheats. Please help me
  6. John Deere Forum
    Hi, I recently picked up a 425 AWS, my first JD. I am looking to put a 46” snowblower on it ,or a 47” if I can afford it. I found a 46” on marketplace for what seems like a fair deal. Issue is that the the model/serial number on the quick attach is missing and the only info they have provided...
  7. John Deere Forum
    I have a JD 425 with a 60” mower deck. The hood has some tape on it but I did all the fluids and filters change. New power steering cylinder and lines sharpen blades. New seat. How much could I sell it for?
  8. John Deere Forum
    I recently bought a JD 425 and did the usual fluids and oil charges. When I go to start it, it make a spinning sound but doesn’t start I have to turn the key muiltiple times then starts. That’s a problem but also when ever I go forward or backwards evening on level surfaces it makes a whining...
  9. John Deere Forum
    I'm looking for some advice on where to start my diagnosis. I've got a '96 425 with 778 hours on it. I've been having some issues with it sputtering and dying, seemingly randomly. Sometimes it happens under load at higher throttle, and sometimes it will be sitting idle. Yesterday it was running...
  10. John Deere Forum
    I have a ‘96 425 with a JD 40 loader. I was using the loader to move some compost around today, when the forward pedal dropped to the floor and the reverse pedal was sticking up much farther than normal. A quick look down and the right rear tire was sitting farther forward that usual. I stopped...
  11. John Deere Forum
    I need to replace the u-joints on my JD425 AWS. I'm referring to those at the rear wheels. It seems JD only sells the complete stub shaft for about $600!! Ouch! I've attached a picture with a KOYO part number, but I didn't find any solid leads on Google for it. Does anyone know where I can...
  12. John Deere Forum
    New to the forum and just picked up a 425 4 wheel steer with 800 hours; my first garden tractor and also first JD. Pretty excited to have a 3 point and a 54" plow with quick hitch. I'm aware of the plastic cam gear issue, and this one's still intact. My understanding is that it doesn't make a...
  13. Jd 425

    My new to me 425 with 500 hours.
    425
  14. Jd 425

    My new to me 425 with 500 hours.
    425
  15. Jd 425

    My new to me 425 with 500 hours.
    425
1-18 of 18 Results
Top