My Tractor Forum banner

Search results

1-20 of 35 Results
Advanced Search
  1. Restoration of 1614

    Power King & Economy Tractors
    Zuren,it's not hard at all. Drain final drive. Take wheel and fender off unhook brake linkage under tunnel. Then take the cap screws out of the brake band housing. After that's off look for a set screw on brake drum ,loosen up so drum comes off. Then take the rest of the cap screws out and...
  2. Restoration of 1614

    Power King & Economy Tractors
    Making headway, hopefully in a couple of months I'll have in done. I keep picking away at it while trying to get other things done. I'm posting this via phone. Can someone tell me why emojis show on my phone when I apply them. But if I log in with a laptop my emojis show up as numbers an goofy...
  3. Restoration of 1614

    Power King & Economy Tractors
    Glad you all like it. It took about 12 hours total to clean up the frame. Neighbor had about 4 hours sealing and painting it.
  4. Restoration of 1614

    Power King & Economy Tractors
    Making headway,got frame all cleaned up. Took it on the half mile journey to the body shop and the neighbor epoxy sealed and painted it.
  5. Restoration of 1614

    Power King & Economy Tractors
    Made a little progress. It's a diamond in the rough. Hopefully this week I can finish cleaning it up
  6. 706 radiator ?

    IH Farmall
    Need new radiator for my 706. Has anybody put an all aluminum Tig welded 5 core radiator in, and how do they hold up to the vibration?
  7. Restoration of 1614

    Power King & Economy Tractors
    Frame hauling Gizmo is done. Hopefully in a day or two I can get powerking frame and rear mounted up. I'll post more pics.?
  8. Restoration of 1614

    Power King & Economy Tractors
    Well, finally got the engine grill an tranny off of the frame. So I thought I'd post some pics of my frame towing gismo. It's not finished, but I'll post pics when frame and rear end is mounted up. The reason for the gismo is to tow the frame to my neighbors body shop and he thought about 3.5...
  9. Jd ?

    John Deere Forum
    Thanks for the help. At the bottom of brochure it says sweepster so I Google that and sweepster is the brand. I found a few doing a Google search ,one was sold,other in North Dakota. That's a drive from Pennsylvania ??? but I'll keep searching.
  10. Jd ?

    John Deere Forum
    I have a jd 300 garden tractor. Did they ever make a power broom that would attach to the front end. An if so what would one cost in average condition?
  11. Restoration of 1614

    Power King & Economy Tractors
    Thanks GB , appreciate the help
  12. Restoration of 1614

    Power King & Economy Tractors
    Well hunting season is over, slowly going to get back to restoration little by little. Was wondering if anyone knows the number of the seal on steering box? And is there a bearing you can put at top of shaft tube instead of the plastic bushing?
  13. Restoration of 1614

    Power King & Economy Tractors
    Working on the tunnel alittle, it was pitted pretty bad from the battery ,so I welded a new piece on. Not gonna be alot of progress for a month or so,archery season started and a man has got to have priorities ????
  14. Upgrading the 1614

    Power King & Economy Tractors
    Gb in Mn glad you like it. For me it was to much black,needed the silver to break it up a little. And Austin you commented about lifting them. I just rolled wheel to tractor and ran jack up and down till it was just right,no lifting at all. Now to get back to the restoration project ?
  15. Restoration of 1614

    Power King & Economy Tractors
    Blasted front axle,installed new bushings in spindle tubes and new bearings in center pivot. Installed new thrust bearings and stuffed it all back together. Cleaned up fenders,took to neighbors body shop,he epoxy sealed them and top coated. Little by little I'll get it done
  16. Restoration of 1614

    Power King & Economy Tractors
    I had the neighbors truck on the lift all week helping him fix it. But today I finally got a little work done on her. Finished cleaning up other spindle, repacked bearings and put new seal in. Took differential cover off drained it,used my buddies blast cabinet to clean it up along with cap...
  17. Power King 2418 Clutch Issues

    Power King & Economy Tractors
    I don't have the seal and bearing #s at the present moment. But if you call Mission Manufacturing Corp. (812)-385-5061 they got them. Or you can email him but I don't currently remember the address,but if you Google it you'll find his web site with address. I just renewed bearings,seals and...
  18. Restoration of 1614

    Power King & Economy Tractors
    Finally started working on it. Gutted final drive,cleaned everything up,renewed the bearings and seals and started reassembly. Next up is the right side. I'll post pictures as I go but it won't be daily,cause I'm slow but thorough. I get things done at turtles pace??,but it could be worse, could...
  19. New to me powerking

    Power King & Economy Tractors
    I wasn't kidding when I said it was a parts machine. I made pieces ?. On a brighter note, in third pic I started tearing apart to rebuild and restore it to a pristine machanized mean machine ???
  20. New to me powerking

    Power King & Economy Tractors
    Austen, I'm going to get the rims powder coated. But to busy to get them to the guy to get it done. You know how it is?
1-20 of 35 Results
Top