My Tractor Forum banner

Search results

1-20 of 27 Results
Advanced Search
  1. New 5232 (Free)

    Walk Behind Mowers
    Curt, I believe it,s 1964: Yeah, it has the variable speed governor lever and most importantly, the aluminum bag,plate. My other 5232 has plastic. Hard to find the aluminum plates. Ron, the wheels are Stens. Cost $8 for front and $9.50 for rear, each.. I used Valspar garden green enamel...
  2. New 5232 (Free)

    Walk Behind Mowers
    Here is my new 5232 that I picked up for free off craigslist: Owner said it would not run: It has a new coil, new lower crank seal, new carb kit and gaskets, new rope, new blade: When I pulled the shroud, whoever put it on didn't line the plug wire up and skinned about 2 inches off it bare...
  3. Identify old Briggs:

    Walk Behind Mowers
    Yeah, but I'm not near it and can't Id them:
  4. Identify old Briggs:

    Walk Behind Mowers
    Can any of you guys identify this old briggs motor? I don't think it is original to this 7000 Lawnboy? A year if possible or any info: Thank You:
  5. Lawnboy L21ZPN or Honda HR214 EK:

    Walk Behind Mowers
    Which mower would you guys pick. Both are very nice condition and either for $50. The lawnboy has electric start and magnesium deck. The honda is a pusher and has a magnesium deck too.
  6. 5006 Bricktop Lawnboy(1982):

    Walk Behind Mowers
    Just wanted to show my latest toy I picked up last week for $50: Lawnboy 5006, from a gentleman that said it had no spark: I would have bought it just for the deck: I took it home, cleaned it up: Pulled the flywheel, cleaned the points and contacts, cleaned the coil up, which looked great and...
  7. 8001 lawnboy photos

    Walk Behind Mowers
    To all the lawnboy fanatics out there, I recently restored an 8001 automower and would love to see some others pictures of this same model. Does anybody have an 8001 or know where I might find some images? I,ve found other automower pics of various models but not the exact model. Also recently...
  8. Last year for Lawnboy Bricktop:

    Walk Behind Mowers
    Does anyone know what the last year they made the Lawnboy Bricktop? 1982? or newer?
  9. Quieting a Lawnboy:

    Walk Behind Mowers
    Thanks guys, I'll recheck everything out really well: Dave.......
  10. Quieting a Lawnboy:

    Walk Behind Mowers
    Has anyone succesfully managed to make their lawnboy mower quieter? I have an older bricktop that I would like to quiet a little more: I was thinking of making some sort of baffle to put inside of the kidney muffler: Maybey some fiberglass or similar material: Just wondering if anyone has...
  11. Post your pictures and model numbers here

    Walk Behind Mowers
    1966 fully restored automower awaiting the decals: Trying to find the best place to get them made: If anybody knows a good place please let me know: Thank You.....
  12. Post your pictures and model numbers here

    Walk Behind Mowers
    1964 5232 thrown together from parts: This is my daily user: and sometimes cuts the neighbors grass as well: Left over Rust Oleum Gold Hammered paint job and some flat aluminum: All left over from previous work: D401 motor and runs perfect:
  13. Home made lawnboy muffler seal:

    Walk Behind Mowers
    Just wanted to let anybody out there who might need a muffler seal for their lawnboy what I've found to work very well and cheap: I was looking for some cotton sash cord to use but all I could find was 3/16" cord at best and that is to thin: So, I picked up a roll of cotton twine, which looks...
  14. Rebuilt Lawnboy Hard Pulling with Plug In:

    Walk Behind Mowers
    I'm sure the starter is wound properly: I have been extremely careful in everything I've done thus far: I sprayed a little lubricant into the plug hole and then worked it in a few times: That seemed to help: I can now pull the rope with the plug in, I think after all the comments that it is...
  15. 1966 8001 Automower:

    Walk Behind Mowers
    On the engine I used Rust Oleum High Temp 2000 degree flat aluminum: It holds up very well: Goes on easy and is forgiving to use:
  16. Masking Old Lawnboy decals without damage:

    Walk Behind Mowers
    Does anybody know what is the best and safest way to mask off old lawnboy shroud decals before stripping,sanding and painting the shroud? I have an old 65 bricktop shroud that is rusty, but the side and front decals are really in great shape, go figure? Anyway, I would like to preserve them...
  17. 1966 8001 Automower:

    Walk Behind Mowers
    The paint color believe it or not is Rust Oleum Fern Green Enamel: That was the closest I could find without getting some mixed: It is but a shade or less darker: Hardly noticeable unless you really Pull one of the white grips off: I left about 3" of unpainted original under the grips just in case:
  18. 1966 8001 Automower:

    Walk Behind Mowers
    Ron, you were the one to inspire me to purchase this mower: I passed it up the first time, went to get a coil from a gentleman and spotted it: Saw your mower on here and went back that evening and bought it: Thank you for all your help: Dave.....
  19. LawnBoy OMC spec needed...

    Small Engines and Repair
    Air Gap is .010
  20. 1966 8001 Automower:

    Walk Behind Mowers
    Starting final assembly of my complete restore of an 8001 automower: Rebuilt motor, carb, everything: Hope you guys like it:
1-20 of 27 Results
Top