Re: What have you used your SCUT for?
Been working on another project. Had what I thought was a gigantic pile of brush, most from the previous owner, but I did add to it. Last time I had a tree service in to take down a couple of trees that I couldn't take down myself, I had them chip the pile. Well, turns out, only the top few feet was brush, under it was a pile of dirt, logs, and junk. The pile was ~6' high, 12'wide, and 25' long. So I started digging in.
Being so large, I attacked the pile by putting the bucket up as high as it would go and back dragging it down, using the teeth to loosen up the ground, pulling the soil out and building myself a platform to reach a little higher each time, until I could reach the top of the pile. Once I exposed a buried log I used a chain to pull them out of the dirt and set them aside. I am spreading the dirt out to level the area where is was clearly taken from. Hope to finish the job this weekend, and will post some follow up pics.
2010 Stihl BR600 backpack blower
2012 Husqvarna 562XP with 20" and 28" bars
2013 Protero PTO-PV18 collection system.
2014 Wallenstein BXM32
2015 Stihl KM130 with line trimmer and hedge trimmer.
2015 Massey Ferguson GC1720 with 2360 front snowblower and 60" drive over MMM.