Restoration Questions - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information
Register Home FAQ Garage MTF Gallery Search Today's Posts Mark Forums Read Store Chat Room

The Barn General discussion of Full size tractors and accessories

Reply
 
Thread Tools Display Modes
Old 07-10-2009, 12:49 AM   post #1 of 9
Seasoned Warrior
Clod Buster
 
Seasoned Warrior's Avatar
 
Join Date: Jun 2009
Location: Mendocino Coast of California
Posts: 26
MTF Member # 28685
Default Restoration Questions

I'm in the process of restoring my Massey Ferguson TO-35. I'd like to add OEM accessories that were available for the tractor when it was new. Some I can find that are original and some appear only available as after-market items. I'd like to add headlights and it appears that the original ones also had a little wing escutcheon but I'm not sure of the exact location of the factory lights and it appears that the only lights available are after-market. I need to replace the hood latches and I can't find any, I'd like to replace the utility light and the rear light but I can only find parts of the original configuration and only as after-market items. Any suggestions would be greatly appreciated.

Regards,
Chuck
Seasoned Warrior is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-10-2009, 02:19 AM   post #2 of 9
Team_Green
Banned!
 
Join Date: Sep 2007
Location: Alberta
Posts: 12,901
MTF Member # 7124
Images: 2
Default Re: Restoration Questions

can you post a picture of the lights you are looking for? Some folks around here (on the forum) have extra parts in the garage. I know i do...
Team_Green is offline   Reply With Quote Quick reply to this message
Old 07-10-2009, 06:41 AM   post #3 of 9
joecdeere
Senior MTF Member
 
joecdeere's Avatar
 
Join Date: Aug 2007
Location: Cumming, GA
Posts: 316
MTF Member # 6834
Default Re: Restoration Questions

the headlight wings are available from Steiner Tractor parts who advertises on this sight. I have a TO-35 with lights but it is on loan to my FIL who doesn't do pictures. I'm posting a couple of pic below of it that my help a bit with placement.
If you look at a Ford 2n or an early 8n the parts and placement are the same as are all the Massey models from the same years, I think all these are the same set up - TE20, TO20, TO30, TO35, MF 20, 30, 35, 40, 50, 65, 85, 88, 95, 97, 98



__________________
1948 Allis UC Hi-Crop Cane
1941 Allis WC
1948 Allis G
1948 Allis G
1949 Allis G
1954 Allis G
1959 Ferguson TO-35
1972 MF 135
1979 Power King 2418
joecdeere is offline   Reply With Quote Quick reply to this message
Old 07-11-2009, 06:02 AM   post #4 of 9
Paul J
Senior MTF Member
 
Paul J's Avatar
 
Join Date: Nov 2008
Location: Green Country, Oklahoma
Posts: 811
MTF Member # 19817
Images: 1
Default Re: Restoration Questions

As far as I know, the bulbs with the checker board design are harder to find than the light bucket. I need a set of bulbs for my Farmall "A". PJ
__________________


REMEMBER & NEVER FORGET
We all live in the land of the free
BECAUSE OF THE BRAVE!
Paul J is offline   Reply With Quote Quick reply to this message
Old 07-12-2009, 12:04 AM   post #5 of 9
Seasoned Warrior
Clod Buster
 
Seasoned Warrior's Avatar
 
Join Date: Jun 2009
Location: Mendocino Coast of California
Posts: 26
MTF Member # 28685
Default Re: Restoration Questions

Quote:
Originally Posted by Team_Green View Post
can you post a picture of the lights you are looking for? Some folks around here (on the forum) have extra parts in the garage. I know i do...
Thanks but I wish I knew! I see that there are lights as an option but I have no idea what is appropriate for the year and model. I guess I need a bit of hand-holding on this since its my first attempt at restoration.
__________________
Living on the Mendocino Coast with my
Massey Ferguson TO-35
Caterpillar D2 4U
Case 580B Loader-Backhoe
Seasoned Warrior is offline   Reply With Quote Quick reply to this message
Old 07-12-2009, 12:08 AM   post #6 of 9
Seasoned Warrior
Clod Buster
 
Seasoned Warrior's Avatar
 
Join Date: Jun 2009
Location: Mendocino Coast of California
Posts: 26
MTF Member # 28685
Default Re: Restoration Questions

Quote:
Originally Posted by joecdeere View Post
the headlight wings are available from Steiner Tractor parts who advertises on this sight. I have a TO-35 with lights but it is on loan to my FIL who doesn't do pictures. I'm posting a couple of pic below of it that my help a bit with placement.
If you look at a Ford 2n or an early 8n the parts and placement are the same as are all the Massey models from the same years, I think all these are the same set up - TE20, TO20, TO30, TO35, MF 20, 30, 35, 40, 50, 65, 85, 88, 95, 97, 98



Thanks for the pix, they help a lot! I appreciate the info, now I need to figure out the size of the hole and I am sure that it must have a grommet to save the wires from abrasion. BTW great looking tractors
__________________
Living on the Mendocino Coast with my
Massey Ferguson TO-35
Caterpillar D2 4U
Case 580B Loader-Backhoe
Seasoned Warrior is offline   Reply With Quote Quick reply to this message
Old 07-12-2009, 09:08 AM   post #7 of 9
joecdeere
Senior MTF Member
 
joecdeere's Avatar
 
Join Date: Aug 2007
Location: Cumming, GA
Posts: 316
MTF Member # 6834
Default Re: Restoration Questions

The wires are protected, the mounting stud is hollow and the wires come through it
__________________
1948 Allis UC Hi-Crop Cane
1941 Allis WC
1948 Allis G
1948 Allis G
1949 Allis G
1954 Allis G
1959 Ferguson TO-35
1972 MF 135
1979 Power King 2418
joecdeere is offline   Reply With Quote Quick reply to this message
Old 07-12-2009, 09:12 AM   post #8 of 9
joecdeere
Senior MTF Member
 
joecdeere's Avatar
 
Join Date: Aug 2007
Location: Cumming, GA
Posts: 316
MTF Member # 6834
Default Re: Restoration Questions

also, thanks for the complement on the tractors, the 135 is the one I grew up on. I tracked it down and bought it back from the man who my father sold it to.
The TO-35 belonged to my wife's grandfather, never been out of the family. I also have her great-grandfathers Allis WC that had never been out of the familr either. Just trying to save some family history!
__________________
1948 Allis UC Hi-Crop Cane
1941 Allis WC
1948 Allis G
1948 Allis G
1949 Allis G
1954 Allis G
1959 Ferguson TO-35
1972 MF 135
1979 Power King 2418
joecdeere is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-13-2009, 06:38 PM   post #9 of 9
Seasoned Warrior
Clod Buster
 
Seasoned Warrior's Avatar
 
Join Date: Jun 2009
Location: Mendocino Coast of California
Posts: 26
MTF Member # 28685
Default Re: Restoration Questions

Quote:
Originally Posted by Team_Green View Post
Some folks around here (on the forum) have extra parts in the garage. I know i do...
Ayone have a complete double spool auxiliary valve for the MF TO-35 that they may be willing to part with? Right now I really wold love to get one of those.

Regards,
Chuck
__________________
Living on the Mendocino Coast with my
Massey Ferguson TO-35
Caterpillar D2 4U
Case 580B Loader-Backhoe
Seasoned Warrior is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:48 PM.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Compact Tractor Reviews Tractor Reviews Snowblowers Lawn Mower Forum
My Tractor Forum Snow Thrower Power Equipment Forum
Combine Forum Snowblower Forum ATV and UTV Reviews