332 Yanmar Valve Adjustment - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information

zslnk · 02-04-2011, 08:56 PM

Hi there,
I have the valve cover off my 332 to change a glow plug (couldn't get a socket over the plug otherwise) and since my valve cover gasket is now toast I figured that I'd adjust the valves. The 332 has 1900hours with ZERO blowby out the breather tube but its a good time to do the job.

Does anyone have the procedure? I do not own a service manual.

The tractor runs really well but was a bit hard to start when really cold (snow service). It was firing right away on some cylinders but demanded more cranking to keep running. A quick test indicated that the front glow plug was not drawing current. I now have 30A on glow, only 20A prior.
Thanks,

02-04-2011, 08:56 PM	#1
zslnk MTF Member Join Date: Nov 2007 Location: Brighton Ontario Canada Posts: 67 MTF Member # 8116	332 Yanmar Valve Adjustment Hi there, I have the valve cover off my 332 to change a glow plug (couldn't get a socket over the plug otherwise) and since my valve cover gasket is now toast I figured that I'd adjust the valves. The 332 has 1900hours with ZERO blowby out the breather tube but its a good time to do the job. Does anyone have the procedure? I do not own a service manual. The tractor runs really well but was a bit hard to start when really cold (snow service). It was firing right away on some cylinders but demanded more cranking to keep running. A quick test indicated that the front glow plug was not drawing current. I now have 30A on glow, only 20A prior. Thanks,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
My Tractor Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)