images of BX2763A plow and quick hitch - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information

forby · 12-20-2010, 10:18 AM

I had a really hard time finding good images of this plow and the male quick hitch BX2751. Now that I bought one I thought I'd share.

forby · 12-20-2010, 10:19 AM

some more

forby · 12-20-2010, 10:21 AM

last one

tiretrx · 12-20-2010, 10:37 AM

I really wish you hadn't shown me that.....................now I want one

Bet you can't wait to use it. Great pics, thanks!

forby · 12-20-2010, 11:33 AM

BTW... the black u-shaped pieces on the rear of the blade are trip lock-outs.

They get moved to the lower holes to lock-out the trip mechanism for bulldozing...

CHDinCT · 12-20-2010, 05:20 PM

Nice pic's. I have the 54" version that I added hydraulic angling to. I think I did find pic's like yours somewhere on how the 60" version hooks up, but these are better. I needed the 60" versions to figure out how I wanted to mount the angle cylinder.

Volfandt · 12-20-2010, 08:48 PM

Good pics. It's very interesting how it mounts to the frame. I can see how it can take a few mount/dismountings before you get a system down. I'd say a dollie would be helpful.
You northern boys have all the winter fun

Dave

forby · 12-21-2010, 10:54 AM

The only thing that grinds my gears about this set up is the plow or hitch must be mis-welded because the plow won't sit level on the ground unless I add one more washer to one side. The subframe sits on the frame and is adjusted with the angled blocks. Each block needs to be set at a different height to get the pin holes to align.

Oh Yeah..... There is also no easy way to add weight to the front with the blade installed

slkpk · 12-21-2010, 06:52 PM

I like those skid shoes and they look to be very heavy duty. slkpk

ken erickson · 12-21-2010, 07:04 PM

Quote:

Originally Posted by slkpk

I like those skid shoes and they look to be very heavy duty. slkpk

I agree, the skid shoes look really stout on this blade. The whole setup looks really well thought out and made. Congrats!

Ken

12-20-2010, 10:18 AM	#1
forby MTF Member Join Date: Nov 2010 Location: PA Posts: 60 MTF Member # 52578	images of BX2763A plow and quick hitch I had a really hard time finding good images of this plow and the male quick hitch BX2751. Now that I bought one I thought I'd share. Attached Thumbnails

12-20-2010, 10:19 AM	#2
forby MTF Member Join Date: Nov 2010 Location: PA Posts: 60 MTF Member # 52578	Re: images of BX2763A plow and quick hitch some more Attached Thumbnails

12-20-2010, 10:21 AM	#3
forby MTF Member Join Date: Nov 2010 Location: PA Posts: 60 MTF Member # 52578	Re: images of BX2763A plow and quick hitch last one Attached Thumbnails

12-20-2010, 10:37 AM	#4
tiretrx Tractor Color Blind Join Date: Jun 2008 Location: East End of Long Island Posts: 7,005 MTF Member # 13571 Images: 8	Re: images of BX2763A plow and quick hitch I really wish you hadn't shown me that.....................now I want one Bet you can't wait to use it. Great pics, thanks! __________________ .....just call me Ellis You only need two tools in life - WD40 and duct tape. If it doesn't move and should, use the WD40. If it shouldn't move and does, use the duct tape.

12-20-2010, 11:33 AM	#5
forby MTF Member Join Date: Nov 2010 Location: PA Posts: 60 MTF Member # 52578	Re: images of BX2763A plow and quick hitch BTW... the black u-shaped pieces on the rear of the blade are trip lock-outs. They get moved to the lower holes to lock-out the trip mechanism for bulldozing...

12-20-2010, 05:20 PM	#6
CHDinCT Proud Member of the 1K Club Join Date: Sep 2007 Location: Killingworth, CT Posts: 1,338 MTF Member # 7272 Images: 7	Re: images of BX2763A plow and quick hitch Nice pic's. I have the 54" version that I added hydraulic angling to. I think I did find pic's like yours somewhere on how the 60" version hooks up, but these are better. I needed the 60" versions to figure out how I wanted to mount the angle cylinder. __________________ Chris BX25, 54" MMM, 5' Rake, Wallenstein BX42 PTO Chipper, Woods Rear Blade, 54" front blade, 48" box blade, Ratchet Rake. 1993 Wheel Horse 520-H, 48" deck & vac bagger. 1967 Wheel Horse 1077 with 36" RD deck (in resto). Cyclone Rake, and other toys, I mean tools

12-20-2010, 08:48 PM	#7
Volfandt Machinery enthusiast Join Date: Mar 2005 Location: Knox County, TN. Posts: 3,877 MTF Member # 164 Images: 1	Re: images of BX2763A plow and quick hitch Good pics. It's very interesting how it mounts to the frame. I can see how it can take a few mount/dismountings before you get a system down. I'd say a dollie would be helpful. You northern boys have all the winter fun Dave __________________ 2004 Kubota BX23 w/60" MMM, Thumb, AM/FM/CD. http://www.mytractorforum.com/showth...highlight=BX23, 1966 Wheel Horse 856, Gear. 1966 Wheel Horse 876, HST. w/50" sicklebar mower, 36" rotary mower, snow blade, alternator/welder. http://mytractorforum.com/showthread...hlight=856,876 The USMC, providing the enemies of the USA the opportunity to die for their country since 1775.

12-21-2010, 10:54 AM	#8
forby MTF Member Join Date: Nov 2010 Location: PA Posts: 60 MTF Member # 52578	Re: images of BX2763A plow and quick hitch The only thing that grinds my gears about this set up is the plow or hitch must be mis-welded because the plow won't sit level on the ground unless I add one more washer to one side. The subframe sits on the frame and is adjusted with the angled blocks. Each block needs to be set at a different height to get the pin holes to align. Oh Yeah..... There is also no easy way to add weight to the front with the blade installed

12-21-2010, 06:52 PM	#9
slkpk USMC Join Date: Mar 2005 Location: Pekin IL. Posts: 18,547 MTF Member # 37 Images: 21	Re: images of BX2763A plow and quick hitch I like those skid shoes and they look to be very heavy duty. slkpk __________________ 1964 JD RF110 Restored 2004 Ingersoll 318LGT @ the church doing the Lord's work 2007 JD 2305 It's too late to worry about it now!

Remove Advertisements Sponsored Links
My Tractor Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode