|02-14-2009, 10:19 AM||#1|
MTF Junior Poster
Join Date: Feb 2009
MTF Member # 22420
I recently purchased this yanmar tractor. Seems to be a great little tractor. I made my decision, in part, from reading discussions on the forum. Thanks for your help. The seller related that he has to find the manual. I'll give him a little time.
My questions, so far, are these:
What should the hydraulic fluid be? Looks like transmission fluid
Do I use the clutch with the transmission. Seems to work great without it.
No two stage clutch. Trans. feels like hydrostatic but was told not but
has to be electric or hydrostatic (nice and pricey Ill bet.) Really to late
now but can this trans. take some abuse?
What does the lever to the left of the pto do? I know it's not an ejector
It also has a valve beside the ebrake that looks like it would control
remote hydro. No remote hydro.
Thanks for any help you send me.
|02-14-2009, 11:42 AM||#2|
Join Date: Mar 2005
Location: S.E. TX
MTF Member # 252
Re: Yanmar fx24d
Welcome to MTF smorris!
I pulled this info from our Yanmar Gray Market Forum:
FX24D-28 Engine HP = 4WD, Transmission- Powershift -3 cylinder (Engine I.D.3TN684U-A), weight 2620# - Years built 84- ?.
I've had one only in my shop and that was to extend the loader control at an angle for the operator/owner. I do have a friend that has had the FX24D for about 3 years now. Never a complaint as the tractor has performed flawlessly.
The lever left of the PTO is most probably the "UFO" control. You may have an electronic box on the fender that also operates in conjnction with the lever. The system is designed to automtically adjust the tiller height allowing the operator 'hands free' once the height is set.
The Powershift transmission was introduced early on the YM10/20 and (F) "X" models for Japan's Rental industry, absolutely bullet proof. I've heard from many others their powershift transmissions are still trouble free even after their first (and second) major engine overhaul (I would guess at or around 6K - 10,000 hours). The engine and that transmission are ideal for FEL work with the ability to shift "On The Fly".
The tractor should have JD303 or equil. Trans-Hydraulic fluid, available almost anywhere. It's not uncommon to see these tractors imported here, with the PINK trans-hyd. fluid. I believe Tractor Ernie, a dealer on the west coast uses transmission fluid in his tractors...and he's a pretty fair sized importer with many F and FX models. He's also very familiar with the UFO controls and the proper way to set them up if you decide to use that feature.
Last edited by mark777; 02-14-2009 at 02:10 PM.
|02-14-2009, 12:11 PM||#3|
Retired Aug.31 2007
Join Date: Jun 2007
Location: Mineola, Texas
MTF Member # 6130
Re: Yanmar fx24d
Welcome to MTF. We are glad to have you.
I always know...
God won't give me more than I can handle
There are times I just wish He didn't trust me quite so much.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|