Property in Malaysia | Find jobs | Online Name | Credit Consolidation | Credit Consolidation
Murray ???'s [Archive] - MyTractorForum.com - The Friendliest Tractor Forum & Discussion Board and Best Place for Tractor Information on the web!!!

PDA

View Full Version : Murray ???'s


amw_drizz
06-03-2009, 10:32 AM
Hi all, bear with me I am not a big tractor buff

Back history, for question(s) skip to end

I've had a Murray 12hp 42" 5spd tractor for well mowing my lot (about 4-5 acres) Any ways last year I let my father use it and he killed the engine in it. It is a Briggs and Straton 12hp I&C engine. He killed the starter, it now has no compression, and the carb is messed up in it.

So the other day I pulled the B&S 8.5hp IC from my Ford LT8 which was running and good just no deck. I swapped the pulleys out on the engine and dropped it right in and got her going. When I started looking around on this site, I found out that the rear end that is in this Murray is quite weak and needs to be taken easy.

Now the question is, Is the rear in the Ford LT 8 better than the rear in the Murray? and if it is will it work in this Murray?

The rear from the Ford LT8 is a 5spd as well.

The whole reason why I ask is that I am kinda abusive towards my equipment and it needs to be able to take a punishment. Up to now the Murray just did lawn duties, and the Ford LT 8 did the other work using a trailer to move the debris from the yard to the woods. And the trailer it used was a stripped down pop up camper.

diesel_nut
06-03-2009, 12:04 PM
I wouldn't pull any heavy loads with the Murray. They are good for cutting grass and that is about it.

jeepersmitty
06-03-2009, 12:35 PM
Welcome to the forum. The Murry will be alright mowing and pulling a small utility trailer.

amw_drizz
06-03-2009, 03:08 PM
Thats why I wanted to know if the Transaxle is better out of the Ford LT 8, And if it is I was gonna pull it out of the ford and frankenstien the Ford axle in to the murray

rattosh51
06-03-2009, 04:46 PM
Might want to try the Ford forum for that question.

johnboggs21
06-03-2009, 04:51 PM
I abuse the hell outta my murray and the transaxle hasnt gone out of it yet. BUT im only operating with 4HP at this time, which might be why. Right now im rebuilding it into a gator type thing which without a doubt will be abused.

Wizard99
06-03-2009, 05:14 PM
Now Johnny no one was trying to offend. Ithought I read somewhere that your murray was in the mud behind the barn broken :sidelaugh

johnboggs21
06-03-2009, 07:46 PM
Musta been someone elses murray. Never had it broken behind the barn before :sidelaugh