New to the forum need info on sears RER

[cndbx]

Hi: I have a gimme,10.5 hp sears 30" lawn tractor
It is quite beat up but looks usable I am wondering is there a
replacement blade that I can install that is a mulch blade
it has two 5/16 screws holding the blade on .It is a Briggs motor
can anyone tell me where the oil drain plug is . Thanks any help
is appreciated

[smallfarmva]

Yea you can still be blades for that machine I know that Watkins Outdoor in Va has them. You can check out their site at http://www.watkinsoutdoor.com

[davidg]

:Welcome1:

to both of you!

cndbx, it is helpful to list the actual sears part number for the machine. it will be XXX.XXXXXX and is usually under the seat or on the fender somewhere. they make so many different but similar units, that one cannot go by a description!

[jeepersmitty]

Welcome and enjoy the forum

to both of you!

[Jim_WV]

:Welcome1: guys !, nice to have you both aboard here with us :fing32:

[cndbx]

Thanks for the info,I do not have any info on the machine what oil should I put in it I was going to go with 10/30 Thanks again

[cndbx]

OK, I pulled off the blade today and it is a mulcher someone put it on up side down I sharpened it and put it back on. I checked the model # it is a MTD
13AB560B000 I have no manual and have no idea what year it is. I would like to change the oil,replace the battery and replace the air filter and possibly tighten up the steering. I know nothing about tractors and apreciate any help.

[John R]

Go to Sears.com, they have parts you can order on line, but like someone said above, you need your model number.