TC45DA hydro kreeps

[champion guy]

I have a 2004 TC45DA with 700 hours. Recently, the tractor will continue to travel (both forward and backward) when the pedals are released. I have lubed the pedals and cam mechanism that work the trans, but no fix. Dealer has looked at tractor but was not able to fix either. Is anyone else having similar problems? And if so, is there a fix?

[dd85]

What engine rpm are you running? On most of the NH Hydro's you have to run minumin 1700erpm for there to be enough huydro pressure to return the pedal to netural. Anything slower and they will take thier time returning to netural. There may be an update on the return spring. I will try to check in the morning.
Welcome to MTF

[JD3520turbo]

Should be able to adjust that out of it. I have seen other brands do that, and the dealer adjusts them somehow and it stops.

[Steve (Magnolia, TX)]

Sorry, but I don't have a clue how to help you with your problem, but... What dd85 said sure sounds plausible to me.

I did want to offer a hearty :Welcome1:, browse around and make yourself at home...

[ricflynn]

My DX45 case the foot pedals were sticking found out they were rubbing on hydralic lines under footboard. The dealer just tied the lines away with zip ties. Problem cured