Ford 1620 Caution Lights

[ansehnlich1]

Hi,

When I turn the caution lights on they don't blink right, they come on and seems like they wanna blink, almost like they're blinking real fast, any ideas? Should I replace the bulbs? Maybe a fuse? Bad switch?

Also, where can I get a good price on 3 pt. hitch parts? The right side vertical lift link is adjustable and it must be stripped bad cuz I can't get it to turn, I've oiled it, had it in a vice, it turns but its surely stripped.

Any help would be appreciated.

Brad

[smithrngr]

for the lights it might be the flasher is bad.

[ansehnlich1]

Hey any idea where that flasher is located?

[bontai Joe]

The flasher in a car is about the diameter of a quarter and about an inch long and can be metal or plactic cased. Usually found real near the fuse box, and they typically plug in, so they are easily changed (no tools necessary) I'm assuming that on a tractor, they would be very similar in size and location.

[dd85]

First off it sounds like a bad ground at one of the lights.
I am trying to attach the parts picture of the flasher (relay)
Well that didn't work I will see of a Mod can insert.

[ansehnlich1]

Thanks for your help. I pulled the 3 fuses and put 'em back in, and the flashers started working right. This is a '93 tractor and I think those fuses got a bit corroded.

Also, that adjustable link lift arm, well, I took it to an implement place. The guy put it in a big vise, got a 3 foot pipe wrench, and broke it loose, I got it standing upright now with brake fluid in there, think it's just rusted bad.

The tractor is nice, it runs good, wish I had a heated cab though :)

[Sand Flat Bob]

Thanks for your help. I pulled the 3 fuses and put 'em back in, and the flashers started working right. This is a '93 tractor and I think those fuses got a bit corroded.

Also, that adjustable link lift arm, well, I took it to an implement place. The guy put it in a big vise, got a 3 foot pipe wrench, and broke it loose, I got it standing upright now with brake fluid in there, think it's just rusted bad.

The tractor is nice, it runs good, wish I had a heated cab though :)

I bought a 1994 1620 new. It has been a great tractor and trouble free. Had to replace the sediment bowl shut off valve, it froze, and a couple hydraulic couplers and lines, other than that no problems. I use it for lot of loader work, shredding, and road maintenance etc.

You will like it,

Bob

[Argee]

Hey ansehnlich1....did you ever find your flasher unit?? Is it fixed??