600 LP case

[nissan]

does anyone have any info on a 1957 case 600 LP that we are trying to restore? we got the 1949 case SO running thanks to people on tractor sites.we have 55 tractors,mostly farmall.I just found this site an hope it is as good as it seems to be so far. I will be glad to help out with any questions,an info about powder coating in your own shop for under $200.

[Jim_WV]

I can't help ya there with info. nissan, but did want to give you a big ole :Welcome1: , hopefully one of the guys might come along to respond to you that knows more :fing32:

[glenn27]

WELCOME Nissan... :Welcome1: Do u have Nissan "stuff"?

And where is Franklin, Pa. located?

[bear]

what type of information are you looking for. i may be able to help you

[nissan]

what type of information are you looking for. i may be able to help you
hi. Well the thing isn't running rite now an the main shaft is pulled out of the trans. with a bad bearing so we got to get enough info to get it back together an tuned up to run. with 55 tractors to fix up we don't want to buy 55 manuals, does any one make a tractor bible for all makes? I also found a pierse-arrow tractor but I can't find so much as a picture of one. it is sittin' out in a strip mine with a bunch of old fords an chevys from the 20's an 30's. thank you for any help an if you need anything let me know.

[nissan]

WELCOME Nissan... :Welcome1: Do u have Nissan "stuff"?

And where is Franklin, Pa. located?
Franklin is about 80 mile north of pittsburgh,an I have a 2002 nissan exterra an a1991 nissan pickup they have both been exclent vehicles.

[bear]

i'll have to check my pile of manuals see if i have one for a 600 case. have you looked into i&t manuals one often covers many different models and as far as manuals go they aren't priced to badly

[bear]

just finished looking through the last of my manuals haven't got anything on the 600 sorry. maybe try a smaller dealership that still works on older tractors that wouls let you copy the info you need

[nissan]

just finished looking through the last of my manuals haven't got anything on the 600 sorry. maybe try a smaller dealership that still works on older tractors that wouls let you copy the info you need
thank you for trying

[bear]

is it a 600b i was looking through my manual catalog and 600b is in the same book as an la one of these years i'll get to working on my la may need a manual i could buy one now if you can't find one anywhere else

[caseman-d]

If you have the 600 with the 6 cylinder 377 it should be a Model 610. They were built in 1957 only. Production was limited to 350. The drive train and most everything should be the same as a 600 diesel. The 600 was replaced by the Case 900 and then the Case 900 was replaced by the 900B which was made in 58 and 59.The biggest change was the sheet metal and injector pump and RPM settings. Also some 500 parts will also work. Might check with mikes600, he has done work on both. I do have parts manuals for both.
caseman-d

[caseman-d]

is it a 600b i was looking through my manual catalog and 600b is in the same book as an la one of these years i'll get to working on my la may need a manual i could buy one now if you can't find one anywhere else
Bear,
The 57 600 is like the Case 500 which replaced the LA. LA and 500 had 4 speed trany VS the 600 was a 6 speed. The 600b was made in 58 and 59, they had the bug eyed look and were a 4 cylinder tractor, totally different tractor.
caseman-d

[bear]

caseman d
so the guy putting the model numbers on the front of the case manual doesn't know what he's talking about. i've noticed it with some mm and ih manuals but i don't know enough about cases to have caught that one thanks for the info.
bear