Credit Consolidation | Credit Consolidation | Cheat Codes | Jobs search | Credit Consolidation
JD#5 Mowers [Archive] - MyTractorForum.com - The Friendliest Tractor Forum & Discussion Board and Best Place for Tractor Information on the web!!!

PDA

View Full Version : JD#5 Mowers


Steve (Magnolia, TX)
05-02-2005, 02:56 PM
A couple of questions regarding John Deere #5 Caster-Wheel Power Mowers.

1. Over what time period were they made?
2. Can you determine the year of one of these? How?

Thanks....

Carl
05-02-2005, 05:48 PM
Steve,
I can't say for sure when these guys were made. I do know that dad bought one in the mid 50s to cut his hay with his trusty B John Deere. It was sure an improvement over the old horse drawn mower that we replaced with the #5.

Ours mounted on the tractor with a couple of approximately 2" diameter stubs that mounted on the side of the swing drawbar support. Our tractor had a geared lift that was used mostly for the cultivator. An arm mounted on the lift's square shaft and hooked to the mower with a cable. This would lift the cutting bar off the ground for transport.

There is a site retiredtractor dot com that has some pictures of it in use. He also has specifics on the different methods of mounting the mower.

I will keep looking. Did a search on the John Deere official site, but it found nothing.