Gator Blades vs OEM Blades - MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information
John Deere Forum John Deere Garden Tractor talk

Reply
 
Thread Tools Display Modes
post #1 of 19 Old 04-20-2012, 10:26 PM Thread Starter
2000 Posts and climbing!!!
 
mikestoy's Avatar
 
Join Date: Feb 2010
Location: Wisconsin
Posts: 2,065
Gator Blades vs OEM Blades

Because I can't see any difference, I got a theory about using my new Gator blades on my 54c deck
over the standard OEM John Deere blades.

Maybe because I cut my grass between 3" and 3 1/4" and it's hard to
see how fine the clippings are.

I cut every week (except when it's dry) just to even out the top so the grass never "clump's", but then again,
because I cut that offen @ that height, it never clump's using the standard blades.

I don't have a mulching kit installed.

So useless I change my cutting habits, I don't see a big deal in Gator blades.


Your opinion please.

Mike
My 2011 X720 Tractor: "The spirit of a race horse....but the body and pulling power of Clydesdale."
2011 X720 54c" mower deck/ 47" snow thrower / 2 bag vacuum System....SWEET

Other Toys:
2012 Honda Goldwing Trike Touring Cycle ......SWEET
2009 18' Lund w/200 hp Boat
2015 Toyota Highlander

Married for 51 years.
1 adopted son, married and lives in Florida
mikestoy is offline  
Sponsored Links
Advertisement
 
post #2 of 19 Old 04-20-2012, 10:33 PM
5000 Strong & Climbing
 
KATT's Avatar
 
Join Date: Oct 2009
Location: New Hampshire
Posts: 8,461
Re: Gator Blades vs OEM Blades

Well up here in Cow Hampshire during the wet season the grass grow high and wet.
The Gators of course clump (albeit less) like the stock blades.
It's after it all dries out most of the time it all just disappears in one pass, where the stock ones wind row for a couple of passes.
I'm sticking with the Gators up here.
And Mike the finer you chop the grass the sooner it turns back to fertilizer.

Current 09 " X520 with 48" Deck, #44 Snow Blower, Weather Enclosure, Wheel Weights, Chains, drift cutter, Brush Guard, #36 Tow Behind Spreader, Single bucket holder, #7 #80 and #50 Trailers,
"11" X540 54" Deck
Some LX 188's and a few 100 series
Previous JD's
"86' 318 #44 Front End Loader, #49 Snow Blower. TY15380 Hard Cab, Wheel weights Chains Weight box ( 6 suitcases ) "99"LX279 Liquid Cooled ."87"SX95 / Rear Bagger, 165 Hydro, STX38, LX188. Toy a 175 Hydro #38 snow blower #38 mower deck.
Sold Rusty
KATT is offline  
post #3 of 19 Old 04-20-2012, 10:39 PM Thread Starter
2000 Posts and climbing!!!
 
mikestoy's Avatar
 
Join Date: Feb 2010
Location: Wisconsin
Posts: 2,065
Re: Gator Blades vs OEM Blades

Quote:
Originally Posted by KATT View Post
And Mike the finer you chop the grass the sooner it turns back to fertilizer.

Now there's something I hadn't thought of.

Mike
My 2011 X720 Tractor: "The spirit of a race horse....but the body and pulling power of Clydesdale."
2011 X720 54c" mower deck/ 47" snow thrower / 2 bag vacuum System....SWEET

Other Toys:
2012 Honda Goldwing Trike Touring Cycle ......SWEET
2009 18' Lund w/200 hp Boat
2015 Toyota Highlander

Married for 51 years.
1 adopted son, married and lives in Florida
mikestoy is offline  
post #4 of 19 Old 04-20-2012, 10:44 PM
Tech Exchange Moderator
 
Sergeant's Avatar
 
Join Date: Mar 2005
Location: Kane County,IL
Posts: 12,188
Re: Gator Blades vs OEM Blades

I cut at 3.5 to 3.75 Through out the mowing season Only In one spot do I see Clipping In a Low spot Near are Creek But If You Bag You will Notice a difference In the Fact You can Mow Longer Before the Bags are Full and I Only Bag in the Fall I will never go Back to OEM Blades If I Can help it Because some Of My Tractors they don't Make Gators for and when I Mow with them I get the standard Grass clip rows where I don't with Gators

John Deere Models:X748,GX335,140H3,112,Sabre 1542
Cub Cadet Models:0riginal,70,106,2206 & Experimental Non Production Rear engine rider
Ingersoll Model:3016PS
Simplicity Models:Wonder Boy
White Model: GT2055

"The only thing necessary for the triumph of evil is for good men to do nothing." Edmund Burke
Sergeant is offline  
post #5 of 19 Old 04-20-2012, 10:59 PM
Senior MTF Member
 
walterjay's Avatar
 
Join Date: Jan 2012
Location: Maryland
Posts: 936
Re: Gator Blades vs OEM Blades

I have cut twice since I installed the gators. There is a big difference. Even my wife who notices very little remarked that she did not see rows of grass clippings.
walterjay is offline  
post #6 of 19 Old 04-20-2012, 11:10 PM Thread Starter
2000 Posts and climbing!!!
 
mikestoy's Avatar
 
Join Date: Feb 2010
Location: Wisconsin
Posts: 2,065
Re: Gator Blades vs OEM Blades

Quote:
Originally Posted by Sergeant View Post
But If You Bag You will Notice a difference In the Fact You can Mow Longer Before the Bags are Full and I Only Bag in the Fall I will never go Back to OEM Blades
I also bag only in the fall so if that's the case, I'll also notice the difference then.

Mike
My 2011 X720 Tractor: "The spirit of a race horse....but the body and pulling power of Clydesdale."
2011 X720 54c" mower deck/ 47" snow thrower / 2 bag vacuum System....SWEET

Other Toys:
2012 Honda Goldwing Trike Touring Cycle ......SWEET
2009 18' Lund w/200 hp Boat
2015 Toyota Highlander

Married for 51 years.
1 adopted son, married and lives in Florida
mikestoy is offline  
post #7 of 19 Old 06-23-2013, 07:46 PM
Diesel Power
 
Harryc's Avatar
 
Join Date: Oct 2011
Location: New York
Posts: 5,340
Garage
Re: Gator Blades vs OEM Blades

I installed a set of G6 Gators on my 345 with a 54C deck and I'm just not feeling the love for them that others see. I may go back to my standard blades. I am seeing an uneven cut and no real lift to speak of. Between my weight and the weight of the machine I need blades that lift up the grass the front wheels push down.
Harryc is offline  
post #8 of 19 Old 06-23-2013, 10:12 PM
Got Grass?
 
MowJoe's Avatar
 
Join Date: Jun 2012
Location: Virginia
Posts: 1,181
Re: Gator Blades vs OEM Blades

I'm with Harry, I put a set of g6's on my 54C and the lift is not that great. Actually I took the whole deck off and went back to my 48C. I run gator blades on all my decks but this year for some reason my results are varying from mower to mower and I cannot figure out why.


'16 X570 48" cut
'08 X520 48" cut
'05 GX255 48" cut
'88 316 3pt lift
(3) 80 Dump Cart
18 Dump Cart
JVR Mowing "Got Grass?"
MowJoe is offline  
post #9 of 19 Old 06-23-2013, 10:40 PM
Retired Super Moderator - Deceased September 2015
 
SonnyT's Avatar
 
Join Date: Jan 2009
Location: Pittsburg, Kansas
Posts: 26,680
Images: 26
Garage
Re: Gator Blades vs OEM Blades

I just put a set of G5"s on my 317 46" deck and they mow great!






RIP Sonny T.
1954-2015
SonnyT is offline  
post #10 of 19 Old 06-23-2013, 11:34 PM
MTF Member
 
Join Date: Aug 2012
Location: Pennsylvania
Posts: 152
Re: Gator Blades vs OEM Blades

Quote:
Originally Posted by SonnyT View Post
I just put a set of G5"s on my 317 46" deck and they mow great!
I just did the same thing last week. Only the G5s went on my 318 46" deck.
Oldoak is offline  
post #11 of 19 Old 06-23-2013, 11:37 PM
Proud Member of the 1K Club
 
JohnnyReb's Avatar
 
Join Date: Apr 2013
Location: Kentucky
Posts: 1,777
Re: Gator Blades vs OEM Blades

I have them on my X340 and GT235 and they both cut great. Both 54 decks. Ill probably never use anything else

2015 JOHN DEERE 1025R H120 60D
2004 JOHN DEERE X485
1983 JOHN DEERE 318
2000 JOHN DEERE GT235

1953 FARMALL SUPER A
2002 HARLEY DAVIDSON WIDE GLIDE

MY TOYS!!
JohnnyReb is offline  
post #12 of 19 Old 06-24-2013, 11:27 AM
Senior MTF Member
 
Join Date: Jun 2012
Location: Wisconsin
Posts: 343
Re: Gator Blades vs OEM Blades

My initial impression is favorable, and better yet it seems the additional hardness makes a world of difference. The tips don't round away like the OEM blades do.

1996 JD 455 2ws 450 tiller, 47" blower 54" blade, 54" mower

2006 JD 3720 with lots of goodies my favorite being my Harley rake followed closely by my Farmi skidding winch

2013 JD x750-AC w/60" HC deck
KennedyDiesel is offline  
post #13 of 19 Old 06-24-2013, 12:33 PM
Senior MTF Member
 
SilverGhost's Avatar
 
Join Date: Jan 2012
Posts: 351
Re: Gator Blades vs OEM Blades

Do a Search on Gator Blades. This question has been asked many times.. The responses are almost always mixed - some love'em, some hate'em.

Gators work great, for me. I always mow dry. If you live where that's not possible, I'm not so sure they are the answer. I always mow starting with the outside edges of the lawn, working in. The discharge chute is always pointed in, toward the uncut grass. This throws what didn't get mulched into the area that I am about to cut. Sometimes the last pass leaves one row of leftover grass. One pass back across it, and Voila!, no clippings.

If
SilverGhost is offline  
post #14 of 19 Old 06-24-2013, 03:16 PM
MTF Member
 
Join Date: Oct 2012
Location: MA
Posts: 76
Re: Gator Blades vs OEM Blades

Quote:
I always mow starting with the outside edges of the lawn, working in. The discharge chute is always pointed in, toward the uncut grass. This throws what didn't get mulched into the area that I am about to cut.
Interesting...I too start at the outside edges chute pointed in, but I make a circluar pattern to the yard closest to the house/deck so the chute is pointed into the yard. (I sometimes get too busy, so I need to mow every 3 weeks, wet or not, can't be picky.) So when I get to the middle of the yard I make a few passes with the chute pointed out toward the trees/ to get the reamining clippings.
gggvan is offline  
post #15 of 19 Old 06-24-2013, 03:45 PM
Proud Member of the 1K Club
 
mikgran's Avatar
 
Join Date: Jun 2011
Location: So. Maine
Posts: 1,359
Re: Gator Blades vs OEM Blades

Quote:
Originally Posted by Harryc View Post
I installed a set of G6 Gators on my 345 with a 54C deck and I'm just not feeling the love for them that others see. I may go back to my standard blades. I am seeing an uneven cut and no real lift to speak of. Between my weight and the weight of the machine I need blades that lift up the grass the front wheels push down.


I used a new set of Gators last season with my 210. I went back to my stock blades this year. No difference whatsoever. I`ll keep them as spares. I know the older decks(my 210 has a model 47) simply do not have the same cut quality as the newer ones and figured maybe I was expecting too much.
mikgran is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome